No, color software is compatible with Color Pixter, only. You will need to insert the Cartridge Adaptor, which comes with the Color Pixter, into the Software Port of the product. Then, fit the black and white software cartridge (sold separately) into the adaptor.
Please be sure you have calibrated the stylus to the screen before you use your Pixter Creativity Computer for the first time. Calibration may need to be repeated periodically. The following will help you to determine if calibration is necessary:
When you draw on the screen, the tip of the stylus doesn’t line up with where you’re drawing.
When you touch a button or arrow, nothing happens.
When you select a stamper, the stamper next to the one you wanted appears on the screen.
When you select a tool, you get the tool next to the one selected.
Here’s how you fix it:
Turn the power on. Wait until you see the "Home" screen.
Find the small hole in the back of your Pixter unit above the battery compartment door. That’s the calibration hole.
Insert, push and hold the stylus in the calibration hole. Turn Pixter over so that you can see the screen. When you see two plus signs, remove the stylus from the calibration hole.
First touch the plus sign in the upper left corner with the tip of the stylus.
Then touch the plus sign in the lower right corner with the tip of the stylus.
A.We recommend using alkaline batteries with our products, as they are great for long-term use and help optimize performance. We do not recommend using Carbon-Zinc batteries. While Carbon-Zinc batteries may work well with low-power devices, inmany ofour products they will drain after a short period of time and cause the product to not function properly.