Try moving your Read With Me™ controller closer to the TV.
Replace the batteries on your Read With Me™ controller.
Make sure your Read With Me™ controller is pointed directly at your DVD player.
Always be sure your hand and the activity card are not covering the red window on the front of the Read With Me™ controller when pressing a button to respond to an activity.
Make sure there are no large objects between your Read With Me™ controller and your DVD player. Large objects can block the signal between your controller and DVD player.
Double check that the 3-position memory switch on the underside of your Read With Me™ controller is in the proper position. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
Please restart the Smart Remote programming process, and retest the controller. If this method is unsuccessful, please check the latest DVD code list to find the proper code for your DVD player. The latest code listing can be found at www.service.fisher-price.com. Also, if you do not have your quick setup sheet, you can download it at www.service.fisher-price.com. Please try setting up your Read With Me™ again using this Smart Remote method and quick setup sheet.
Here are some tips that may help you during the quick setup: Make sure you are using fresh alkaline batteries inside your Read With Me™ controller.
If you have followed the instructions on the quick setup sheet and your Read With Me ™ controller is still not working with your DVD player, try the setup again from the beginning.
It is possible that one of the signals did not register when pressed on your DVD player’s remote.
When pressing the numbers on your DVD remote be sure to wait for the audio prompt to finish and the LED on the Read With Me™ controller turns on.
No. The setup of your controller is only required one time for each DVD player with which you are using your Read With Me™ controller. If you have correctly setup your controller with the software that was included with your Read With Me™ controller, the controller should work with the separately sold software titles.
The Klip Klop Stable features a gate on the lower blue ramp, which we included to provide another way for children to interact and engage with the product. We added this feature after our packaging photography was finalized, which is why it isn’t currently reflected on the package. We include product images with the gate on our website and in our product demo video. We apologize for any confusion this may have caused.
The following Little People products may be submerged in water: W2596 Dolphin W2595 Seal W2592 Alligator N1691 Summer Vacation M6632 Floaty Boat K7702 Bath Bar 77703 Floaty Boat 72556 Floaty Boat J4422 Sea Skiff P8630 Pink Floaty Boat N0723 Water themed LP figures in Tube N6230 Pink Sail 'n Float Boat K7710 Whale Watching
Try each of the codes listed under "ALL MODELS" for your DVD player's manufacturer until you find one that can work properly for all shapes on the test screen and both the skip ahead and skip back on the Read With Me™ controller.
Rotate Bigfoots elbowtowards the back of the body for the thumb to latch onto the ball. Do not pull the hand down or forward to give Bigfoot the ball. Once the ball is placed in Bigfoot’s hand correctly, press the ball button on the remote.
The vehicles that come with the Little People Spin 'n Crash Raceway™ are slightly larger and heavier allowing the product to function better with the vehicles it comes with. The Little People® Wheelies™ vehicles do fit and will work on the Raceway but not as well as the vehicles that originally come with the Raceway.
You only need to setup your Read With Me™ controller one time per DVD player. Your Read With Me™ controller can setup to be played with up to 3 different DVD players. There is a 3-position memory switch on the underside of your Read With Me™ controller. Each position of the switch can be programmed to a different DVD player. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.