First, ensure that the figure is specifically meant for the Apptivity WWE Rumblers game, and is not a regular Rumblers figure. You will be able to tell whether it is for Apptivity by looking for the base that the figure sits on.  Only the figures with a base will work with the game. 

Check the bottom of the base for debris, and wipe it with a clean, dry cloth.

Wipe your screen with a soft, dry cloth to ensure the best conductivity with the base.

Make sure you are holding the figure by the grips on its base in order for it to be recognized.  Do not wear gloves or mittens since the grips need to come in contact with your fingertips.

Make sure that you are not placing the figure on the frame around the iPad screen. You must keep the figure only within the active screen area.

If you want to come back to play later, simply lift up your fingers or the figure to get the pause menu.  Then press the iPad home button to minimize the app. 

You cannot go to the main menu to switch between characters without losing your progress.

• First, ensure that the car is specifically meant for the Apptivity Hot Wheels game, and not a regular Hot Wheels car. You will be able to tell whether it is for Apptivity by looking for the contact points on the bottom of the car.
• Ensure that the contact points are extended rather than retracted. There is a button on the bottom of the car that allows you to switch between traditional Hot Wheels car play (retracted) and Apptivity mode (extended).
• Check the bottom of the car for debris, and wipe it with a clean, dry cloth.
• Wipe your screen with a soft, dry cloth to ensure the best conductivity with the car.
• Make sure you are holding the car in the right location in order for it to be recognized.
  • Hold it in the center and on the sides of the car while the tires are on the screen.
  • Make sure that you are not placing the car on the black or white frame around the iPad screen. You must keep the car only within the screen area.
  • Do not wear gloves or mittens since the car needs to come in contact with your fingertips.

·         The action button is the button on the top of the figure’s base that you can press down in order to advance dialogue, use your character’s special ability in the game, and interact with your environment. 

IMPORTANT, PLEASE READ THIS SECTION FIRST: 
The instructions below are only intended for users of Version 3.0 or higher.  If you have are using Version 2.0 or lower, please note that the product has moved, and the same app is now available as Thomas & Friends: Engine Activity Fun -- please download the new version here: https://itunes.apple.com/us/app/thomas-friends-engine-activity/id623385416?ls=1&mt=8.  

For Version 3.0 or higher users ONLY:
As you continue to purchase packs, you will unlock cards for your match card collection. To see which cards you already have, go to the match game and tap the Thomas icon in the bottom right corner of the screen. From here, you can view and interact with your cards, or purchase more for your collection!

On the main menu, tap “Play” then enter any level of the game, and put your King Pig figure down anywhere on the iPad screen once you are in that level.

·         You can, but you will not get the full experience and ease of functionality as when playing with the toy.

·         To enable play without the toy, you will need to unlock it by getting 3 stars in every level.

From your iPad home screen, open the App Store, and download the latest version of Angry Birds HD or Angry Birds HD Free.

From your iPad home screen, go to Settings, General, then Multitasking Gestures. Turn off Multitasking Gestures.

Make sure that you do not press the figure down on the iPad home button, as that will close the game.

• Touch the screen with your finger to move forward to the next page.
• If the game keeps freezing, try doing a hard reset. 
  • Click the home button on your iPad to get to the home screen.
  • Then double-click the home button again. The multitasking bar will appear. 
  • Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button. 
  • Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.

·         Check the bottom of the figure for debris, and wipe it with a clean, dry cloth.

·         Wipe your screen with a soft, dry cloth to ensure the best conductivity with the figure.

·         Do not wear gloves or mittens since the figure needs to come in contact with your fingertips.

·         Make sure that you are not placing the figure on the frame around the iPad screen. You must keep the figure only within the active screen area.

·         The figure is only recognized when placed within an open level, so make sure you don’t put it down on a menu page or another non-playable screen.

In career mode or exhibition mode, look for black track-pad with chevron arrows at bottom or side of the screen.  Move your figure back and forth along the track-pad rapidly to grapple, pin, or toss a Superstar out of the ring. 

In the specialty matches, move your figure back-and forth along the track-pad rapidly to catch up to the opposing Superstar, or to increase your power against him.

·         From your iPad home screen, go to Settings, General, then Multitasking Gestures. Turn off Multitasking Gestures.

·         Make sure that you do not press the figure down on the iPad home button, as that will close the game.

• From your iPad home screen, go to Settings, General, then Multitasking Gestures. Turn off Multitasking Gestures.
• Make sure that you do not press the car down on the iPad home button, as that will close the game.

You can, but you will only be able to play the initial portion of each character’s game unless you have Apptivity toy for that character.

To play without the toy, use two fingers to move around the screen, and a third finger to press the action button.

• To play without the toy, use two fingers to activate the virtual car.  The action button is the red portion of the car hood that you can press with another finger.
• In order to access the content in the hangars each time you play, you must first find the co-pilot monkey by following the purple monkey icon.  The monkey will give you keys to the hangar.  Or, you can buy the co-pilot monkey using a one-time in-app purchase, so you don’t need to do this every time you play.
• You can customize your virtual car in the workshop also, using credits that you can earn or purchase in the app.

If the game keeps freezing, try doing a hard reset.  Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear.  Touch the thumbnail of the game until it wiggles, and then touch the minus button.  Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.

Check the bottom of the base for debris, and wipe it with a clean, dry cloth.

Wipe your screen with a soft, dry cloth to ensure the best conductivity with the figure.

Make sure you are holding the figure in the right location in order for it to be recognized.  Hold it on the sides of the base where the black indented finger grips are.  Do not wear gloves or mittens since the base needs to come in contact with your fingertips.

Make sure that you are not placing the figure on the black or white frame around the iPad screen. You must keep the figure only within the screen area.

·         In-app purchases are not available in this game.

You need the appropriate piece of equipment, such as a flotation device, big-wheel tires or wings, to access certain areas. You can get this equipment in the Workshop, which you can find by following the green tool icon, then pressing the action button once you arrive at the Workshop hangar.