The more you play the game, the more credits you earn. You can redeem credits in the workshop. Your credits are listed in the top right corner of the screen.
|
We know a big concern with parents is the safety of playing with a physical toy on their iPad screen. Acknowledging this, we have developed Apptivity toys utilizing special screen-safe plastic that when clean and free of foreign debris will not scratch screen surfaces.
|
You can, but you will not get the full experience and ease of functionality as when playing with the Apptivity toy.
-
To play without the toy, use two fingers to activate the virtual car. The action button is the red portion of the car hood that you can press with another finger.
-
In order to access the content in the hangars each time you play, you must first find the co-pilot monkey by following the purple monkey icon. The monkey will give you keys to the hangar. Or, you can buy the co-pilot monkey using a one-time in-app purchase, so you don’t need to do this every time you play.
-
You can customize your virtual car in the workshop also, using credits that you can earn or purchase in the app.
|
Additional red, purple, and black markers are available in the Monster Maker Primary Extension Pack, sold separately.
|
· The action button is at the center of the base. Hold the base with your thumb and middle finger, and hit the action button with your index finger.
|
· Check the bottom of the figure for debris, and wipe it with a clean, dry cloth.
· Wipe your screen with a soft, dry cloth to ensure the best conductivity with the figure.
· Do not wear gloves or mittens since the figure needs to come in contact with your fingertips.
· Make sure that you are not placing the figure on the frame around the iPad screen. You must keep the figure only within the active screen area.
· The figure is only recognized when placed within an open level, so make sure you don’t put it down on a menu page or another non-playable screen.
|
From your iPad home screen, go to Settings, General, then Multitasking Gestures. Turn off Multitasking Gestures.
Make sure that you do not press the figure down on the iPad home button, as that will close the game.
|
Hello Barbie™ may occasionally encounter issues sending and receiving conversations. The issues may be based on signal strength, roaming, or Internet congestion. Usually the issues are brief and Hello Barbie™ will resume operation quickly. This can also occur when Hello Barbie™ has been in connection mode for along time or has timed out after a long period of inactivity. Turning Hello Barbie™ off and on again will enable the doll to resume normal activity.
This may also happen if Hello Barbie™ loses its WiFi connection. Please take the following steps:
- Close the Companion App
- Go to your devise's WiFi settings
- Reconnect to your WiFi network
In addition, you may get this message if Hello Barbie's batteries are low. If this is the case, please place Hello Barbie™ back on her charger.
|
There is a silver-colored speed control button on the lower left side of the screen. The image on it is a gear box. Tap the button to move from “Stop” mode to “Slow” and “Fast” modes.
|
· Touch the screen with your finger to move forward to the next page.
· If the game keeps freezing, try doing a hard reset. Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear. Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button. Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
· The game also goes into a pause state if your fingers or the figure and base are removed from the screen. Place fingers or figure back down where suggested by the base outline to continue play.
|
· The action button is the button on the top of the figure’s base that you can press down in order to advance dialogue, use your character’s special ability in the game, and interact with your environment.
|
· Yes, you can play these with your figure, but are only equipped with one forward facing rocket launcher blast.
|
The action button is at the center of the base. Hold the base with your thumb and middle finger, and hit the action button with your index finger.
|
· You can, but you will not get the full experience and ease of functionality as when playing with the toy.
· To enable play without the toy, you will need to unlock it by getting 3 stars in every level.
|
Each character has a special ability that allows them to do unique actions within their world. It is able to be activated when the base glows on screen and there is a humming sound effect; at that point you can press the action button on the base of the figure.
o Frankie’s special ability is to electrify objects.
o Draculaura’s is to hang from the ceiling.
o Lagoona’s is to clear murky water.
o Clawdeen’s is to follow a scent trail.
|
For best results, make sure doll parts are clean and dry before installing in Monster Maker. If your design did not print completely, erase ink using the provided sponge. Add water and a little dish soap (not included) and rub with the sponge until the ink is removed. Dry the doll part thoroughly before putting it back in the Monster Maker.
|
We know a big concern with parents is the safety of playing with a physical toy on their iPad screen. Acknowledging this, we have developed our toys utilizing special screen-safe plastic that when kept clean and free of foreign debris will not scratch screen surfaces.
|
-
Monster Maker is made for iPad Air, iPad mini with Retina display, iPad (4th generation), iPad mini, and iPad (3rd generation). iOS 7.0 or higher is required.
-
Monster Maker is compatible with Samsung Galaxy Tab®, Samsung Galaxy Tab® 2, Samsung Galaxy Tab® 3, Samsung Galaxy Tab®, 8.9, Samsung Galaxy Tab® 10.1, Samsung Galaxy Note®, Google Nexus 7 (2012), Google Nexus 7 (2013), Google Nexus 10, Sony Xperia™ Tablet Z, Toshiba Excite™.
|
Check the bottom of the base for debris, and wipe it with a clean, dry cloth.
Wipe your screen with a soft, dry cloth to ensure the best conductivity with the figure.
Make sure you are holding the figure in the right location in order for it to be recognized. Hold it on the sides of the base where the black indented finger grips are. Do not wear gloves or mittens since the base needs to come in contact with your fingertips.
Make sure that you are not placing the figure on the black or white frame around the iPad screen. You must keep the figure only within the screen area.
|
The app may display this message if the doll part is not installed completely. Make sure that the doll part is installed per the instructions, and that the carriage slide is lined up with the doll part icon.
|