You can win Health Boosts for each of your clans by playing Training Games. Use the Health Boosts in battle to restore some of your hybrid's health, letting you stay in the fight longer.
To use a Health Boost, click the Health Boost icon when it is you turn. The number on the icon will go down, showing you how many Health Boots you have left. When you've used all your Health Boots, the icon will disappear.
Any Health Boots you use in a fight will be used up forever, but any you don't use will carry over for other members of the same clan to use in the next fight. Be sure to use them wisely!
|
There are five different reasons this message may appear. Find the correct message below:
There is no USB Drive Inserted.
- No USB drive is inserted.
- The USB drive is not seated properly.
The USB Drive is full.
- There is not enough space on the USB to save the picture.
USB Removed While Saving.
- USB drive is removed during the save process. The drive can be re-inserted and save should continue.
USB Error.
- You have plugged in a USB device that is not a drive (i.e., mouse).
- Your drive is formatted incorrectly.
- Your USB does not fit in slot.
Battery too Low to Save.
- The batteries need to be replaced in the base unit.
|
|
Call the number on the back of the instructions that came with your Barbie Girl™.
After your purchase has been verified you’ll be issued a new registration code.
|
· Check the bottom of the figure for debris, and wipe it with a clean, dry cloth.
· Wipe your screen with a soft, dry cloth to ensure the best conductivity with the figure.
· Do not wear gloves or mittens since the figure needs to come in contact with your fingertips.
· Make sure that you are not placing the figure on the frame around the iPad screen. You must keep the figure only within the active screen area.
· The figure is only recognized when placed within an open level, so make sure you don’t put it down on a menu page or another non-playable screen.
|
- Click a green dot in the icon column.
- Click the New button on the Icon Picker.
- Use the pencil and eraser tools to create a new icon.
- Click the Save button to assign it to the song.
|
|
Try replacing batteries and make sure there are no cracks in the propellers. If there is a crack in the propeller, do not operate toy. If your cat is still not flying, please contact Mattel Consumer Services.
|
In swing mode, you may use your Swing to High Chair until the child becomes active and can climb out of the swing; 25 pounds maximum.
In high chair mode, you may use your Swing to High Chair in the upright position only by children capable of sitting up unassisted; 50 pounds maximum. Use the restraint system until your child is able to get in and out of the product unassisted (about 2 ½ years old).
|
- Change batteries
- Check for obstructions around moving parts
|
Click here for instructions on how to perform a hard factory reset on your nabi 2S tablet (including nabi Collector's Edition: The Force Star Wars tablets).
|
|
The Monster High Create A Monster Design Lab is designed to fit most Monster High® limbs with the exception of textured limbs or limbs with scales or fins.
|
|
Yes, as long as it is a standard size SD/SDHC card up to 16 gigabytes (GB) in size. Please note, however, that after inserting into the hadnheld device, it will overwrite any existing pictures/files already on the SD card.
|
|
No, the cables for Digital Arts and Crafts Studio are not replaceable.
|
Follow the steps below to reset the Read With Me™ controller and restart the programming process:
- Place the face plate back on the Read With Me™ remote briefly.
- Press any single button and remove the cover.
- This will restart the set up mode and the remote will prompt you to "place DVD remote in front of the Read With Me™ remote".
|
Hot Wheels replacement parts are available at our
Parts Store.
|
Try the following:
· Check to be sure that the computer/login has administrator privileges.
· Make sure your firewall or antivirus settings allow for file downloads.
· Consult the Help section of the download site.
|
|
We create the story starter backgrounds by taking screenshots within Minecraft itself, printing them out and placing them behind and under the figures.
|
No. The setup of your controller is required only one time for each DVD player with which you are using your InteracTV controller. If you have correctly setup your controller with the software that was included with your InteracTV controller, the controller should work with the separately sold software titles.
InteracTV™ is a mark of Beep Telecommunications and computing, L.L.C. Used under license.
|
|
The Preview Reel allows you to access the sample content of the View-Master® VR Experience Packs. Simply download any View-Master® app and select PREVIEW REEL when prompted to get a free demo of the full experience.
|
The Power Wheels® 12V Quick Charger will not produce an output until it is plugged into a working Power Wheels® battery. The charger needs to detect a battery before it starts charging, so no voltage will be present when testing it with a volt meter.
|
|
To protect your privacy, all personally identifying information relating to the Sproutling product will be deleted from our servers. That also means you won't have access to your historical sleep data in the app after October 31, 2018.
|
