Augmented Reality is an effect that overlays digital, 3D images on your physical environment. For instance, when looking through your View-Master® VR viewer at an experience reel sitting on your table – depending on the reel – you might see a 3D model of a spaceship or a dinosaur floating above it. As you move around the reel, you will be able to see other sides of the 3D model as if it was actually there.

• Playing with InteracTV requires you to insert an activity card into the controller. When inserting the activity card, make sure to point the controller at the DVD player.
• If the controller is programmed correctly, the footage on the TV should change when the activity card is inserted. Some DVD players respond slower than others, so give it a second. The wait should be no longer than 5 seconds.
• Footage of your favorite TV character will play on the TV. At some point the character will ask the child a question and footage on the TV screen will match the icons on the activity card. Wait for the character to finish asking the question or giving directions.
• Then you can input your answer by pressing one of the icons on the activity card. Make sure the controller is pointed at the DVD player when you do this. Your selected answer should light up on the TV screen and the footage should continue.
• At anytime you can press either the forward or back arrows to forward to the next section or skip back to the previous section. The green indication light will light up whenever you press an icon or arrow button.
• Removing the activity card brings you back to the main menu screen. You can then put in a different activity card and continue playing. An activity card must be in the unit in order for the controller to work.

You may use your cradle swing from birth until the child becomes active and can climb out of the swing; 25 pounds maximum.

No, the light bulb in the Easy Link® is not replaceable.

Checking for Updates

• Hello Barbie™ will check for updated when connected to the charging station and plugged in, and also connected to WiFi.
• Please connect Hello Barbie™ and wait a few minutes to make sure any updated are applied.
• You won't need to do anything else nor will you see anything different happen.  When Hello Barbie™ starts talking, any update has been successfully applied.

It is possible that the units simply need to be reset or paired.

1. Press the pairing button on the side of the receiver with a paperclip until the power button L.E.D. blinks and the range indicator turns on.

2. Press the pairing button on the back of the transmitter with a paperclip until the receiver range indicator turns off.

Absolutely! Beyond the initial three Experience Packs of Space, Destinations, and National Geographic Wildlife, new experiences will be released throughout 2016 and beyond.

Within career mode matches, when either your energy or your opponent’s energy level is low, the game will engage “power play” mode. Within that mode, you can use a special digital object that comes with your Superstar. 

This is also where you can use the physical objects that come with the Apptivity WWE Rumblers Starter Set.

• Open your e-mail.
• Save the nail design to your desktop.
• Open the software.
• Go to import.
• Browse to find the nail design on your desktop.
• Click ok.
• Your design will be saved in the Mani By Me folder.

·         In-app purchases are not available in this game.

You can create up to 5 custom profiles.

• Connect the handheld device to your computer.
• Open it and turn power ON.
• Go to the Customize section of the iXL™ Computer Software.
• Upload a picture and answer questions using the drop-down menus.
• Be sure to include a name in the Name field. Please note: the name can not be more then 9 characters long.
• Click on the Transfer Profile arrow to move the information to the handheld device.

Follow these steps:

• Per the instruction sheet, the wing pack with missile figure must be properly locked into place first.  A click sound will indicate that it’s properly locked. 

• While cranking the dial clockwise, you will hear a slight clicking noise.  You will hear a LOUD click after several turns.

• For the best launch, crank the dial clockwise until you hear the second LOUD clicking noise.  This will be after at least 7 full revolutions, which equates to about 14 turns (2 turns per revolution).

• After cranking the dial, ensure that wing pack is still locked into place.

• For maximum distance, angle the toy so the missile figure is at a 30 degree angle.  Then press the button to launch.

 

Use the circular stencil tool to add detail to your artwork. First fully insert the pen until you hear/feel it click and adjust the spray nozzle until you get a nice even spray. Then plug the circular stencil tool directly onto the end of the airbrush tip. Rotate the stencil to select the artwork that you would like to apply. The art should be centered over the spray tip and applied to the car in close range.

Touch the screen with your finger to move forward to the next page.

 

If the game keeps freezing, try doing a hard reset.  Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear.  Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button.  Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.

The game goes into a pause state if your fingers or the figure and base are removed from the screen.  Place fingers or figure back on screen where suggested by the base outline to continue play.

You need administrative privileges to install this software. If the software did not begin automatically installing, double click the “My Computer” icon on your desktop. Double click the CD-ROM icon labeled “UCreate” and double click “Ucreate.msi” and follow the on-screen instructions.

Viewing the Knows Your Name software at 800x600 screen resolutions may restrict the display of help text on the screen.  Change to 1024x768 screen resolution or higher to have a full view of the help text.

It is printed on the back of the booklet. It is 12 characters long and is located on a rectangular box in the upper left corner of the back cover. The key is unique and can only be used to register one Ucreate Games and Artimation unit.

The Camera/Printer busy error appears when there is a communication error between the printer and the computer. To correct this issue:

• Close the software
• Open Control Panel
• Open the Printers & Faxes
• Double-click the Mattel Barbie Doll’D Up Nails Printer
• Delete any nail prints that are in the queue

Check all the connections to make sure they’re tight. Also make sure the Barbie Girl™ USB connector is popped all the way out of the device. If it is, plug it firmly into the docking station. Then be sure to plug the USB cable firmly into a USB port on your computer.
 
If the device is still not recognized, plug the docking station into a different USB port. Remember…the Barbie Girl™ device software only works on a PC computer. Your Barbie Girl™ is not Mac compatible. Ask a grownup for help if you need it!

Look in your inventory, it might be there. If it's not, look around Puerto Verde and click on the people there--they can help you find what you need.