The forward and backward arrow buttons on your InteracTV controller can be used to skip a game or to return to a previous section of a game.

 InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.

No, The InteracTV system will not work with video game consoles.

X-Box is a registered trademark of Microsoft Corporation.

Playstation is a registered trademark of Sony Computer Entertainment, Inc.

InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.

Try each of the codes listed under "ALL MODELS" for your DVD player's manufacturer until you find one that can work properly for all shapes on the test screen and both the skip ahead and skip back on the Read With Me™ controller.

1. Make sure the InteracTV controller has good batteries. Slide the 3 position memory switch, on the back of the controller, to the desired memory position. The controller is capable of being setup for up to 3 different DVD players in 3 different locations.The controller must be setup and tested individually for each of the 3 DVD players, but once that is done the controller will retain the manufacturer's code and does not need to be setup again.If the consumer accidentally enters a new valid 4-digit manufacturer’s code, then they must set it up again for that DVD player.It is a good idea to write the 4-digit manufacturer’s code in the labeling area provided on the back of the controller.
2. Insert the compilation DVD into the DVD player and turn on the DVD player and TV.
3. Insert the programming card into the controller; the green light should blink twice.
4. Locate the manufacturer’s codes in the user’s manual.
5. Enter the first 4 digit code listed under the manufacturer. Use the right arrow button for the number. The light should blink after each button press and blink a long blink after the 4^th digit is entered.
6. Remove the programming card.The light should double blink when the card is removed
7. Insert the test card into the unit;the green light should double blink.
8. The DVD should skip to the test screen, if it does not, repeat from step 3, choosing the next manufacturer’s code on the list. If the test card skips to the footage, which resembles the test card, then proceed with testing the unit.See Testing the unit section of you manual or quick setup instructions.
9. If you have tried all of the manufacturer's codes listed and you cannot locate an acceptable code, see programming the unit using manual search in your user's manual.

• Always make sure you remove the activity card from your InteracTV controller slowly, wait a few seconds, and then insert an activity card.
• The red window on the front of your InteracTV controller should always be pointed directly at your DVD player.
• Always be sure your hand and the activity card are not covering the red window on the front of the InteracTV controller when you are removing and inserting the activity card. Covering up this red window can block the signal between your InteracTV controller and your DVD player.
• Make sure there are no large objects between your InteracTV controller and your DVD player because they can block the signal between your controller and DVD player.

InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.

If you receive this error try the following items:

• Unplug the keyboard from the USB port and then plug the keyboard back into the USB port.
• Try connecting to another open USB port.

You only need to set up your InteracTV controller one time per DVD player. Your InteracTV controller can be set up to be played with up to three different DVD players. There is a 3-position memory switch on the underside of your InteracTV controller. Each position of the switch can be programmed to a different DVD player. Refer to your InteracTV User's Manual for instructions on how to use the 3-position memory switch.

InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.

The InteracTV system will not work with your computer.

InteracTV™ is a mark of Beep Telecommunications and computing, L.L.C. Used under license.

• Make sure you have set up your InteracTV controller correctly.
• Try moving your InteracTV controller closer to the TV.
• Replace the batteries on your InteracTV controller.
• Make sure your InteracTV controller is pointed directly at your DVD player.
• Always be sure your hand and the activity card are not covering the red window on the front of the InteracTV controller when removing and inserting an activity card.
• Make sure there are no large objects between your InteracTV controller and your DVD player. Large objects can block the signal between your controller and DVD player.
• When changing activity cards, always make sure you remove the activity card from your InteracTV controller slowly, wait a few seconds, and then insert another activity card.
• Double check that the 3-position memory switch on the underside of your InteracTV controller is in the proper position. Refer to your InteracTV User's Manual for instructions on how touse the 3-position memory switch.

InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.

How do I determine the version electronically?

• Insert programming card
• press 0010
• after pressing last 0 watch indicator light
• count the number of blinks
• that is the major version number (2 blinks would be 2.??)
• if no blinks it is version 1.0
• remove programming card and reinsert
• press 0011
• after pressing last 1 watch indicator light
• count the number of blinks
• that is the minor version number
• no blinks is zero

Example: 0010 is pressed and it blinks twice. 0011 is pressed and it blinks twice. The version is 2.2