The Imaginext® DC Super Friends™ RC Transforming Bat Bot’s remote is shipped without batteries, so please be sure to place two AAA batteries into the remote. Also, there is a clear plastic packaging tab that is attached to the outer leg of the non-battery leg of the robot. The tab should come out of the leg when removed from the box; however, it’s possible that a piece of the plastic remained in the slot on the leg. Please check the slot, which is located behind the front wheel. If you see clear plastic protruding from the slot, carefully remove it with tweezers, and turn the toy off and on again. This should clear the slot and make the toy function as it normally should.
|
Click here for the assembly video.
|
2 AAA Batteries
|
No. The setup of your controller is only required one time for each DVD player with which you are using your Read With Me™ controller. If you have correctly setup your controller with the software that was included with your Read With Me™ controller, the controller should work with the separately sold software titles.
|
Each Read With Me™ software disc includes 100 random activities and interactive questions.
|
- Reduce the amount of cargo cars being pulled – try pulling 1 less car until train stays on track
- Load engine onto track at EZ Loader
- If derailment is happening at the top or bottom of ramps try adding a straight piece of track to the top and bottom of the ramp
- Do not have a switch track at bottom OR top of a ramp
|
Bigfoot needs to finish a sequence before starting a new sequence. If a sequence is interrupted, Bigfoot will say ‘hey’ or ‘huh’. Wait until the sequence is complete and then try hitting a command again.
|
The engines and track from Thomas Trackmaster, Take 'n Play/Adventures, Wooden Railway, and Geotrax products are NOT compatible with each other.
|
|
Consult with your Read With Me instruction manual. You will need to program your Read With Me controller using method 2 - using manufacture codes, or method 3 - manual search.
|
Depress the button with “EZ” sculpted on it; located on top of the engine.
|
The page forward and page backward arrow buttons on your Read With Me™ controller can be used to skip a game or to return to a previous section of a game.
|
Rotate Bigfoots elbow towards the back of the body for the thumb to latch onto the ball. Do not pull the hand down or forward to give Bigfoot the ball. Once the ball is placed in Bigfoot’s hand correctly, press the ball button on the remote.
|
Yes, the cartridges from your Smart Cycle® Extreme will work with the original Smart Cycle
|
The figures for the 2014 Loving Family™ Dollhouse line are slightly smaller and slimmer than previous Loving Family™ figures, but the Loving Family™ furniture is the same size scale as previous models. All Loving Family™ figures will fit in the house.
|
The red easel is tightly packed into an indentation on the under side of the main play set on the Little People Preschool.
|
Yes. You can pause Read With Me™ at any time using the pause button on the Read With Me™ controller or the remote control that came with your DVD player.
|
No.
|
Click here for the assembly video.
|
- Battery installation instructions are on instruction sheet
- Remove 2 Phillips-head screws located on bottom of train
*Do not remove triangular-head screws
|