- Change batteries
- Check for obstructions around moving parts
|
|
Yes, on hard surfaces.
|
|
This is the internal clutch mechanism which makes a loud clicking noise when the train is overloaded or stuck. Hearing this noise does not mean the Engine is broken. It is OK if the Engine makes this noise.
|
- Battery installation instructions are on instruction sheet
- Remove 2 Phillips-head screws located on bottom of train
*Do not remove triangular-head screws
|
|
Depress the button with “EZ” sculpted on it; located on top of the engine.
|
|
|
|
Yes.
|
|
|
|
|
|
Five minutes.
|
|
|
- Reduce the amount of cargo cars being pulled – try pulling 1 less car until train stays on track
- Load engine onto track at EZ Loader
- If derailment is happening at the top or bottom of ramps try adding a straight piece of track to the top and bottom of the ramp
- Do not have a switch track at bottom OR top of a ramp
|
|
Yes.
|
|
|
|
|
|
|
|
No.
|
|
On average an engine should run 2-3 hours using alkaline batteries.
|
|
|
|
|
