You can combine your pens to get more color combinations. For example, you can get green by applying blue and yellow inks over each other. First apply a thin layer of one color until you get the desired coverage, then switch pens and apply an even layer of your second ink. Try making your own combinations!
|
On
the underside of the launcher, each end of the rubber band should be wrapped
around a peg on each side of the main launcher and then doubled up and hooked
around the center tab of the moveable portion of the launcher.
Here is a picture of an assembled rubber band launcher!
|
-
First, ensure that the car is specifically meant for the Apptivity Hot Wheels game, and not a regular Hot Wheels car. You will be able to tell whether it is for Apptivity by looking for the contact points on the bottom of the car.
-
Ensure that the contact points are extended rather than retracted. There is a button on the bottom of the car that allows you to switch between traditional Hot Wheels car play (retracted) and Apptivity mode (extended).
-
Check the bottom of the car for debris, and wipe it with a clean, dry cloth.
-
Wipe your screen with a soft, dry cloth to ensure the best conductivity with the car.
-
Make sure you are holding the car in the right location in order for it to be recognized.
-
Hold it in the center and on the sides of the car while the tires are on the screen.
-
Make sure that you are not placing the car on the black or white frame around the iPad screen. You must keep the car only within the screen area.
-
Do not wear gloves or mittens since the car needs to come in contact with your fingertips.
|
You need to fine tune the spray nozzle by turning the adjustment nozzle all the way to the negative side (-). Then while holding the trigger down, slowly adjust the nozzle toward the positive side (+) until you get a nice even spray. You should also make sure that the pen is fully inserted by pushing it all the way into the slot on the spray gun until you hear/feel it click.
|
We have a network of over 350 Authorized Service Centers to help you with repairs and replacement parts. These Service Centers have skilled personnel and use only genuine Power Wheels replacement parts to fix your vehicle. Use our Service Center Locator to find a service center near you.
|
You can, but the adhesive should be applied to a clean, smooth, dry surface when the temperature is above 50°F (10°C). If the temperature is below 50°F, you can heat the surface with a hair dryer before application.
|
Variations in Hot Wheels cars are the slight differences between cars of the same model. For example, with the many different wheel styles available, the same car model can have a wildly different look just by changing the wheels.
|
Battery life will vary depending on how you follow the Charging and Battery Care Instructions. It's also affected by the total number of hours the batteries are used. Average battery life is one to three years.
|
To clean the ink off of your car, rub it with a damp cloth and start again!
|
Push the handle on the far right counterclockwise all the way to the ground and the car platform will tip forward, allowing your car to roll out.
|
Medium 3M Command Mounting™ Refill Strips can be used to hang the Hot Wheels® Wall Track™ Playsets.
|
|
The booster needs to be correctly assembled to its designated wall bracket in order to function. The designated wall bracket has a notch on it. This notch ensures the motor only works when attached to the bracket. All other brackets are flat.
Watch set-up instructions for your track.
|
Instructional videos include a review of box contents, items you'll need to get started and helpful tips about Hot Wheels Wall Tracks.
|
Click here for instructions on how to clear app data on your tablet.
|
-
You can customize your vehicle in the workshop. Follow the green tool icon to find the workshop hangar.
-
There are multiple types of customizations that you can make:
-
One-shots are one-time game modifiers that you can use to improve your performance, such as nitro bursts that give you faster speed. However, after you use a one-shot, you no longer have it anymore. You would need to unlock another one to use it again.
-
Add-ons are customizations that can be used forever on your vehicle, such as tires or weapons. Once you have unlocked them, they are permanently available for your use.
-
In order to modify your vehicle in the workshop, tap any icon in the circle with your finger and it will take you to the page where you can unlock it, if you have enough credits.
-
You can purchase more credits to unlock specific one-shot or add-on modifications. Once add-ons are purchased, they will always be available to equip your car.
|
For any issue with the Power Wheels® 12V Quick Charger please follow this Flow Chart.
|
Hot Wheels replacement parts are available at our
Parts Store.
|
Traction bands have been designed for and are included for use on specific single seat Jeep models to improve traction. The unauthorized use of traction bands on other Power Wheels® vehicles will void the product warranty and may pose both safety and reliability issues including decreased motor and/or gearbox life.
|
Make sure you charge the battery for at least 18 hours (30 hours max) before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. *It is necessary to charge the battery immediately after use. It is damaging to the battery when it has been used and then sits without being charged. After a full charge the battery can sit up to two-three months when not in use.
|