|
- Change batteries
- Check for obstructions around moving parts
|
The enter button on your DVD remote may also be called select, set, return, etc.
|
|
https://qservice.corp.mattel.com/us/Docs/
|
|
Consult with your Read With Me instruction manual. You will need to program your Read With Me controller using method 2 - using manufacture codes, or method 3 - manual search.
|
The figures for the 2014 Loving Family™ Dollhouse line are slightly smaller and slimmer than previous Loving Family™ figures, but the Loving Family™ furniture is the same size scale as previous models. All Loving Family™ figures will fit in the house.
|
No.
|
Bigfoot’s battery should be charged for 4 hours. Charging Instructions:
- The LED light on the charger will remain red for 4 continuous hours after being plugged in.
- After 4 hours the LED will turn green.
Please Note: If the charger is unplugged after this time and plugged back in, the LED will turn red again for 4 hours even though the battery is fully charged. The LED is not an indicator as to whether the battery is fully charged.
|
The following Little People products may be submerged in water: W2596 Dolphin W2595 Seal W2592 Alligator N1691 Summer Vacation M6632 Floaty Boat K7702 Bath Bar 77703 Floaty Boat 72556 Floaty Boat J4422 Sea Skiff P8630 Pink Floaty Boat N0723 Water themed LP figures in Tube N6230 Pink Sail 'n Float Boat K7710 Whale Watching
|
The Klip Klop Stable features a gate on the lower blue ramp, which we included to provide another way for children to interact and engage with the product. We added this feature after our packaging photography was finalized, which is why it isn’t currently reflected on the package. We include product images with the gate on our website and in our product demo video. We apologize for any confusion this may have caused.
|
If Bigfoot stops working, check the following
- Motor Stall – Was there any audible beeps from Bigfoot before he shut down: If audible beeps came from Bigfoot, a motor has stalled.
- 1-Beep = arm motors stall
- 2-Beeps = leg motor stall
- 3-Beeps = head motor stall
To Fix the Motor stall:
- Remove any obstruction from Bigfoot’s path.
- Turn the product off and then back on to restart the product.
- If this stall condition continues to happen when no obstruction is present, there is a malfunction with Bigfoot. Please contact Consumer Relations.
- Low Battery - Did Bigfoot say ‘Low battery’ before he stopped.
- If the battery is low, Bigfoot will say ‘low battery’, and the battery pack needs to be charged.
|
You only need to setup your Read With Me™ controller one time per DVD player. Your Read With Me™ controller can setup to be played with up to 3 different DVD players. There is a 3-position memory switch on the underside of your Read With Me™ controller. Each position of the switch can be programmed to a different DVD player. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|
Try each of the codes listed under "ALL MODELS" for your DVD player's manufacturer until you find one that can work properly for all shapes on the test screen and both the skip ahead and skip back on the Read With Me™ controller.
|
We'd like to let you know that there have been some design changes made to the Imaginext® DC Super Friends™ Batcave. The gray door located on the front upper portion of the Imaginext® DC Super Friends™ Batcave and telescope base was removed from the product and a rounded end has been added to the telescope. The rounded end will fit into one of the two hex fittings that have been added to the purple platform.
In order to lower the telescope in the elevator, you will need to put the ball on the bottom of the telescope into the raised hexagon opening and have the telescope facing forward. Tip it back and the elevator will now lower.
|
The Imaginext® DC Super Friends™ RC Transforming Bat Bot’s remote is shipped without batteries, so please be sure to place two AAA batteries into the remote. Also, there is a clear plastic packaging tab that is attached to the outer leg of the non-battery leg of the robot. The tab should come out of the leg when removed from the box; however, it’s possible that a piece of the plastic remained in the slot on the leg. Please check the slot, which is located behind the front wheel. If you see clear plastic protruding from the slot, carefully remove it with tweezers, and turn the toy off and on again. This should clear the slot and make the toy function as it normally should.
|
Click here for the assembly video.
|
No. The setup of your controller is only required one time for each DVD player with which you are using your Read With Me™ controller. If you have correctly setup your controller with the software that was included with your Read With Me™ controller, the controller should work with the separately sold software titles.
|
The engines and track from Thomas Trackmaster, Take 'n Play/Adventures, Wooden Railway, and Geotrax products are NOT compatible with each other.
|