|
You have the option of either rendering your comic as a video through the icon on the upper right hand of the Edit Comic screen and viewing them on your device or read through them within the app through the My Comics page.
|
|
The marker can be found under the block that comes with each figure. Each core Mattel Minecraft figure comes with the marker ready to be scanned.
|
It does not, all your comics are saved under the My Comics page located on the lower left hand side of the main screen.
|
|
A different block comes with each toy, on the bottom is a black and white marker. Open Unlock Rewards within the app, line this marker up and unlock your sounds, story starter and sticker.
|
Some smartphones may require you to remove any third-party case before placing between the clamps inside of the viewer.
When using an iPhone 5s, iPhone 5c, or iPhone 5, you need to place the included Adapter onto one side of the iPhone before placing your iPhone into the viewer.
|
|
We create the story starter backgrounds by taking screenshots within Minecraft itself, printing them out and placing them behind and under the figures.
|
|
If the latch on your viewer is difficult to open, apply pressure on both halves of the viewer when opening the latch.
|
Try to increase or decrease ambient lighting. Scanning may function better in different light, depending on the device used. Position the device at mid-range from the sticker, wait for the camera to focus, then slowly back away and/or move closer to optimize the zoom. Make sure your camera lens is clean.
|
|
We recommend that you clean your Mega Bloks® building blocks by hand with warm water or a damp cloth. You can air-dry parts at room temperature or use a dry cloth. Please do not put Mega Bloks® building blocks in washing machines or dishwashers or attempt to dry them in ovens, microwaves, or by using a hair dryer.
|
|
|
|
This means there is a figure waiting to be scanned. When you tap the tile, it will let you know which toy you need to unlock that content.
|
The apps are designed for your device to go into the viewer in only one orientation. Rotate your device counter-clockwise to be sure that the top of your phone (the part where the earpiece is) is on the left before putting it into the View-Master® viewer.
The app will not function properly if your device has its orientation lock on. On iOS, swipe up from the bottom of your screen and check that this feature is OFF. Settings may vary for different Android Devices. The Orientation settings can usually be found in the Settings under the Display Settings function.
|
Follow these steps:
-
Per the instruction sheet, the wing pack with missile figure must be properly locked into place first. A click sound will indicate that it’s properly locked.
-
While cranking the dial clockwise, you will hear a slight clicking noise. You will hear a LOUD click after several turns.
-
For the best launch, crank the dial clockwise until you hear the second LOUD clicking noise. This will be after at least 7 full revolutions, which equates to about 14 turns (2 turns per revolution).
-
After cranking the dial, ensure that wing pack is still locked into place.
-
For maximum distance, angle the toy so the missile figure is at a 30 degree angle. Then press the button to launch.
|
