If the latch on your viewer is difficult to open, apply pressure on both halves of the viewer when opening the latch.

You have the option of either rendering your comic as a video through the icon on the upper right hand of the Edit Comic screen and viewing them on your device or read through them within the app through the My Comics page.

Some smartphones may require you to remove any third-party case before placing between the clamps inside of the viewer.

When using an iPhone 5s, iPhone 5c, or iPhone 5, you need to place the included Adapter onto one side of the iPhone before placing your iPhone into the viewer.

Follow these steps:

• Per the instruction sheet, the wing pack with missile figure must be properly locked into place first.  A click sound will indicate that it’s properly locked. 

• While cranking the dial clockwise, you will hear a slight clicking noise.  You will hear a LOUD click after several turns.

• For the best launch, crank the dial clockwise until you hear the second LOUD clicking noise.  This will be after at least 7 full revolutions, which equates to about 14 turns (2 turns per revolution).

• After cranking the dial, ensure that wing pack is still locked into place.

• For maximum distance, angle the toy so the missile figure is at a 30 degree angle.  Then press the button to launch.

 

We recommend that you clean your Mega Bloks® building blocks by hand with warm water or a damp cloth.  You can air-dry parts at room temperature or use a dry cloth.  Please do not put Mega Bloks® building blocks in washing machines or dishwashers or attempt to dry them in ovens, microwaves, or by using a hair dryer.

To order a replacement Pass Card, please visit service.mattel.com.

A different block comes with each toy, on the bottom is a black and white marker. Open Unlock Rewards within the app, line this marker up and unlock your sounds, story starter and sticker.

The marker can be found under the block that comes with each figure. Each core Mattel Minecraft figure comes with the marker ready to be scanned.

The viewer has calibrated lenses to facilitate the 3D/stereoscopic experience and will maintain a lighting environment needed for optimal performance.

Classic photo View-Master® viewers with reels are still available to consumers through our licensee, The Bridge Direct.

The apps are designed for your device to go into the viewer in only one orientation. Rotate your device counter-clockwise to be sure that the top of your phone (the part where the earpiece is) is on the left before putting it into the View-Master® viewer.

The app will not function properly if your device has its orientation lock on. On iOS, swipe up from the bottom of your screen and check that this feature is OFF. Settings may vary for different Android Devices. The Orientation settings can usually be found in the Settings under the Display Settings function.

Your finger needs to be touching the black strip on the lever. Don’t tap the lever too gently. Make sure you pull the lever all the way down. Hold it in place for a second to ensure that it registers.

If you have an iPhone 5 or 5c, make sure you are using the adapter.

If none of those solutions work, launch a VR experience then remove your smartphone and tap the gear icon at the bottom of the screen. Follow the prompts to configure your viewer (you may be required to download the Google Cardboard app). Follow the prompts to scan the QR code inside your viewer or use the QR code below.

The Preview Reel allows you to access the sample content of the View-Master® VR Experience Packs. Simply download any View-Master® app and select PREVIEW REEL when prompted to get a free demo of the full experience.

1. Print the above Preview Reel AR tag image (at 100% scale for best viewing).
2. Download any free View-Master® app.
3. Make sure the app is running and your mobile device is inserted into your viewer of choice (note: viewer must allow camera pass-through).
4. Place the printed Preview Reel on a flat surface.
5. Look through your viewer at the reel from a distance of 10 inches or less.
6. Digital icons will appear above the reel.
7. Select which experience you want to explore by looking at the appropriate AR icon and pulling the lever.
8. Enjoy and preview other View-Master® experiences!
   

It does not, all your comics are saved under the My Comics page located on the lower left hand side of the main screen.

Each experience pack comes with a Pass Card, which is for piracy protection and to unlock the full digital Virtual Reality experience.

Try to increase or decrease ambient lighting. Scanning may function better in different light, depending on the device used. Position the device at mid-range from the sticker, wait for the camera to focus, then slowly back away and/or move closer to optimize the zoom. Make sure your camera lens is clean.

This means there is a figure waiting to be scanned. When you tap the tile, it will let you know which toy you need to unlock that content.

Augmented Reality is an effect that overlays digital, 3D images on your physical environment. For instance, when looking through your View-Master® VR viewer at an experience reel sitting on your table – depending on the reel – you might see a 3D model of a spaceship or a dinosaur floating above it. As you move around the reel, you will be able to see other sides of the 3D model as if it was actually there.

When looking through the viewer, move closer to the reel, less than 10 inches away. AR icons work best when looking down at the reel, and in a well-lit room.