|
Follow the steps below to reset the Read With Me™ controller and restart the programming process:
- Place the face plate back on the Read With Me™ remote briefly.
- Press any single button and remove the cover.
- This will restart the set up mode and the remote will prompt you to "place DVD remote in front of the Read With Me™ remote".
|
- Change batteries
- Check for obstructions around moving parts
|
The enter button on your DVD remote may also be called select, set, return, etc.
|
Yes, on hard surfaces.
|
If Bigfoot stops working, check the following
- Motor Stall – Was there any audible beeps from Bigfoot before he shut down: If audible beeps came from Bigfoot, a motor has stalled.
- 1-Beep = arm motors stall
- 2-Beeps = leg motor stall
- 3-Beeps = head motor stall
To Fix the Motor stall:
- Remove any obstruction from Bigfoot’s path.
- Turn the product off and then back on to restart the product.
- If this stall condition continues to happen when no obstruction is present, there is a malfunction with Bigfoot. Please contact Consumer Relations.
- Low Battery - Did Bigfoot say ‘Low battery’ before he stopped.
- If the battery is low, Bigfoot will say ‘low battery’, and the battery pack needs to be charged.
|
|
You must restart the programming process. Follow the steps below to begin:
- Shut off your DVD player.
- Remove the cover from the controller to begin audio prompts.
- Begin programming.
- Once programming procedure has been completed, move forward to retest the controller.
|
Yes.
|
This is the internal clutch mechanism which makes a loud clicking noise when the train is overloaded or stuck. Hearing this noise does not mean the Engine is broken. It is OK if the Engine makes this noise.
|
No. EZ Play Railway is a more realistic train size and the proportions of Geo Trax do not match it. Also, the new track is more efficient so we can include more track pieces in the package.
|
You only need to setup your Read With Me™ controller one time per DVD player. Your Read With Me™ controller can setup to be played with up to 3 different DVD players. There is a 3-position memory switch on the underside of your Read With Me™ controller. Each position of the switch can be programmed to a different DVD player. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|
The Klip Klop Stable features a gate on the lower blue ramp, which we included to provide another way for children to interact and engage with the product. We added this feature after our packaging photography was finalized, which is why it isn’t currently reflected on the package. We include product images with the gate on our website and in our product demo video. We apologize for any confusion this may have caused.
|
GeoTrax replacement parts are available at our Parts Store.
|
All Bigfoots use the same signal. You can not operate 2 different Bigfoots at once. They will both be controlled by the same remote.
|
https://qservice.corp.mattel.com/us/Docs/
|
Yes, the cartridges from your original Smart Cycle® will work with the new Smart Cycle® Extreme
|
Five minutes.
|
Try each of the codes listed under "ALL MODELS" for your DVD player's manufacturer until you find one that can work properly for all shapes on the test screen and both the skip ahead and skip back on the Read With Me™ controller.
|
We'd like to let you know that there have been some design changes made to the Imaginext® DC Super Friends™ Batcave. The gray door located on the front upper portion of the Imaginext® DC Super Friends™ Batcave and telescope base was removed from the product and a rounded end has been added to the telescope. The rounded end will fit into one of the two hex fittings that have been added to the purple platform.
In order to lower the telescope in the elevator, you will need to put the ball on the bottom of the telescope into the raised hexagon opening and have the telescope facing forward. Tip it back and the elevator will now lower.
|
The Imaginext® DC Super Friends™ RC Transforming Bat Bot’s remote is shipped without batteries, so please be sure to place two AAA batteries into the remote. Also, there is a clear plastic packaging tab that is attached to the outer leg of the non-battery leg of the robot. The tab should come out of the leg when removed from the box; however, it’s possible that a piece of the plastic remained in the slot on the leg. Please check the slot, which is located behind the front wheel. If you see clear plastic protruding from the slot, carefully remove it with tweezers, and turn the toy off and on again. This should clear the slot and make the toy function as it normally should.
|
Click here for the assembly video.
|
2 AAA Batteries
|
No. The setup of your controller is only required one time for each DVD player with which you are using your Read With Me™ controller. If you have correctly setup your controller with the software that was included with your Read With Me™ controller, the controller should work with the separately sold software titles.
|
Each Read With Me™ software disc includes 100 random activities and interactive questions.
|
- Reduce the amount of cargo cars being pulled – try pulling 1 less car until train stays on track
- Load engine onto track at EZ Loader
- If derailment is happening at the top or bottom of ramps try adding a straight piece of track to the top and bottom of the ramp
- Do not have a switch track at bottom OR top of a ramp
|
Bigfoot needs to finish a sequence before starting a new sequence. If a sequence is interrupted, Bigfoot will say ‘hey’ or ‘huh’. Wait until the sequence is complete and then try hitting a command again.
|
The engines and track from Thomas Trackmaster, Take 'n Play/Adventures, Wooden Railway, and Geotrax products are NOT compatible with each other.
|
|
Consult with your Read With Me instruction manual. You will need to program your Read With Me controller using method 2 - using manufacture codes, or method 3 - manual search.
|
Depress the button with “EZ” sculpted on it; located on top of the engine.
|
The page forward and page backward arrow buttons on your Read With Me™ controller can be used to skip a game or to return to a previous section of a game.
|
Rotate Bigfoots elbow towards the back of the body for the thumb to latch onto the ball. Do not pull the hand down or forward to give Bigfoot the ball. Once the ball is placed in Bigfoot’s hand correctly, press the ball button on the remote.
|
Yes, the cartridges from your Smart Cycle® Extreme will work with the original Smart Cycle
|
The figures for the 2014 Loving Family™ Dollhouse line are slightly smaller and slimmer than previous Loving Family™ figures, but the Loving Family™ furniture is the same size scale as previous models. All Loving Family™ figures will fit in the house.
|
The red easel is tightly packed into an indentation on the under side of the main play set on the Little People Preschool.
|
Yes. You can pause Read With Me™ at any time using the pause button on the Read With Me™ controller or the remote control that came with your DVD player.
|
No.
|
Click here for the assembly video.
|
- Battery installation instructions are on instruction sheet
- Remove 2 Phillips-head screws located on bottom of train
*Do not remove triangular-head screws
|
You can purchase replacement cards and cases by contacting us at 888-892-6123, Monday through Friday, 9:00 AM to 6:00 PM EST.
|
Bigfoot’s battery should be charged for 4 hours. Charging Instructions:
- The LED light on the charger will remain red for 4 continuous hours after being plugged in.
- After 4 hours the LED will turn green.
Please Note: If the charger is unplugged after this time and plugged back in, the LED will turn red again for 4 hours even though the battery is fully charged. The LED is not an indicator as to whether the battery is fully charged.
|
Please restart the Smart Remote programming process, and retest the controller. If this method is unsuccessful, please check the latest DVD code list to find the proper code for your DVD player. The latest code listing can be found at www.service.fisher-price.com. Also, if you do not have your quick setup sheet, you can download it at www.service.fisher-price.com. Please try setting up your Read With Me™ again using this Smart Remote method and quick setup sheet.
Here are some tips that may help you during the quick setup: Make sure you are using fresh alkaline batteries inside your Read With Me™ controller.
-
If you have followed the instructions on the quick setup sheet and your Read With Me ™ controller is still not working with your DVD player, try the setup again from the beginning.
-
It is possible that one of the signals did not register when pressed on your DVD player’s remote.
-
When pressing the numbers on your DVD remote be sure to wait for the audio prompt to finish and the LED on the Read With Me™ controller turns on.
|
Yes.
|
If your DVD player is not responding to your Read With Me™ controller please try the following:
- Make sure you have setup Read With Me™ controller correctly. The quick setup sheet can be found at www.service.fisher-price.com and the latest list of codes can be found at www.service.fisher-price.com
- Try moving your Read With Me™ controller closer to the TV.
- Replace the batteries on your Read With Me™ controller.
- Make sure your Read With Me™ controller is pointed directly at your DVD player.
- Always be sure your hand and the activity card are not covering the red window on the front of the Read With Me™ controller when pressing a button to respond to an activity.
- Make sure there are no large objects between your Read With Me™ controller and your DVD player. Large objects can block the signal between your controller and DVD player.
- Double check that the 3-position memory switch on the underside of your Read With Me™ controller is in the proper position. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|
The vehicles that come with the Little People Spin 'n Crash Raceway™ are slightly larger and heavier allowing the product to function better with the vehicles it comes with. The Little People® Wheelies™ vehicles do fit and will work on the Raceway but not as well as the vehicles that originally come with the Raceway.
|
No. The Read With Me™ system will not work with video game consoles.
Xbox is a registered trademark of Microsoft Corporation. PlayStation is a registered trademark of Sony Computer Entertainment, Inc.
|
On average an engine should run 2-3 hours using alkaline batteries.
|
The following Little People products may be submerged in water: W2596 Dolphin W2595 Seal W2592 Alligator N1691 Summer Vacation M6632 Floaty Boat K7702 Bath Bar 77703 Floaty Boat 72556 Floaty Boat J4422 Sea Skiff P8630 Pink Floaty Boat N0723 Water themed LP figures in Tube N6230 Pink Sail 'n Float Boat K7710 Whale Watching
|