Extreme heat conditions and sunlight may cause the adhesive to eventually deteriorate, causing product failure. The adhesive could soften and lose adhesion above 105°F (40°C).
|
If you receive an error message during printing, turn off the Monster Maker using the power switch. Wait a few seconds and turn it back on. Restart the app.
|
You can win Health Boosts for each of your clans by playing Training Games. Use the Health Boosts in battle to restore some of your hybrid's health, letting you stay in the fight longer.
To use a Health Boost, click the Health Boost icon when it is you turn. The number on the icon will go down, showing you how many Health Boots you have left. When you've used all your Health Boots, the icon will disappear.
Any Health Boots you use in a fight will be used up forever, but any you don't use will carry over for other members of the same clan to use in the next fight. Be sure to use them wisely!
|
You may use your Booster Seat with a child who has enough upper body control to sit up unassisted; 45 pounds maximum.
Use the restraint system until your child is able to get in and out of the product unassisted (about 2 ½ years old).
|
Within career mode matches, when either your energy or your opponent’s energy level is low, the game will engage “power play” mode. Within that mode, you can use a special digital object that comes with your Superstar.
This is also where you can use the physical objects that come with the Apptivity WWE Rumblers Starter Set.
|
Use the map and go to each area of Puerto Verde. When you arrive in a new area, move your mouse over each building to find out what it is. If you can't find the place you are looking for, try clicking on an edge of the screen to look in a new area.
|
- Insert the test card. If the DVD skips to the test screen, press each letter A-I on the test card and wait for the corresponding letter to light up on the TV screen before pressing the next letter. If each of the letters successfully lights up, press each of the two arrow buttons and wait for the arrow button to light up on the TV screen before pressing the next arrow button.
- If all the buttons light up, remove the test card. The footage should now display a screen with 3 activity cards on it (menu screen). If so, you have successfully programmed the controller.
- Insert an activity card you are now ready to play. See the "Playing with InteracTV" section of your manual.
- If all the buttons do not light up or you return to the menu screen when the card is removed (the controller is only partially functional), it is possible there is a different code which will give the controller full functionality. Try programming a different code using one of the two programming methods. See Programming the remote using Manufacturer’s codes section or Programming the unit using the manual search method section of your manual.
- If you have exhausted all the codes and none of them gives you full functionality, (changing a macro may help) see the "Using Macros" section of your manual.
|
You only need to setup your Read With Me™ controller one time per DVD player. Your Read With Me™ controller can setup to be played with up to 3 different DVD players. There is a 3-position memory switch on the underside of your Read With Me™ controller. Each position of the switch can be programmed to a different DVD player. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|
Each DVD player will respond differently to your InteracTV controller. Some players will take longer to access the DVD then other players do. For the best results, please make sure that you press the button one time and then wait a few seconds for a reaction from your DVD player. If you do not get a reaction from your DVD player after a few seconds, try pressing the button again. Also, make sure you are pressing the buttons firmly.
InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.
|
You can make thousands, but the Compound gets crowded and you can only keep 50 at a time. So sometimes you will need to let some hybrids go in order to make room for new ones. To release a hybrid, go to the compound and press the "Release Hybrid" button. A message will come up asking you to confirm that you are ready to let that hybrid go; once you choose "Yes", the hybrid will be gone for good.
You can also release a hybrid if you try to save one when you've reachd the maximum capacity of your Dino Compound. A message will come up in the Hybrid Creator letting you know your Dino Compound is full and you'll have to relaease a hybrid to save a new one - from here you can either release a hybrid and save the new one, or choose not to save the new hybrid you just created.
|
Your finger needs to be touching the black strip on the lever. Don’t tap the lever too gently. Make sure you pull the lever all the way down. Hold it in place for a second to ensure that it registers.
If you have an iPhone 5 or 5c, make sure you are using the adapter.
If none of those solutions work, launch a VR experience then remove your smartphone and tap the gear icon at the bottom of the screen. Follow the prompts to configure your viewer (you may be required to download the Google Cardboard app). Follow the prompts to scan the QR code inside your viewer or use the QR code below.
|
|
Connect the controller to a powered USB port with the supplied USB cable. Attach the power cable located inside the controller to Barbie™ Star Light Adventure RC Hoverboard. Set the toy to OFF position and controller in “charging” position (left). Charging light should be in red and turns green when it is fully charged.
|
Click
Press the spacebar as many times as you can before the time runs out.
Single Timing
The pointer moves around in a circle. When it is pointing at the yellow line, click (or press the spacebar). The cloaser to the middle of the line you are, the better your attack will work.
Multi Timing
Same as Single Timing, but there is more than one line to hit. Hit them all for the best results.
Moving Timing
Same as Multiple Timing but the lines move around the circle, not just the pointer. This is the hardest version of the game!
Accuracy
Click all the targets that appear before time runs out.
Shooting Gallery
Hit the targets as they appear. Try to hit the middle for a bull's eye and extra points!
Cool-down
Each Secret Attack has a cooldown time. The cooldown time is how long you have to wait until you can use the attack again. after you use an attack, you will see the icon change to show the cooldown timer. When the cooldown timer disappears, you can use the attack again on your next turn. Secret Attacks have short, medium or long cooldowns.
|
The apps are designed for your device to go into the viewer in only one orientation. Rotate your device counter-clockwise to be sure that the top of your phone (the part where the earpiece is) is on the left before putting it into the View-Master® viewer.
The app will not function properly if your device has its orientation lock on. On iOS, swipe up from the bottom of your screen and check that this feature is OFF. Settings may vary for different Android Devices. The Orientation settings can usually be found in the Settings under the Display Settings function.
|
Apptivity is currently only compatible with iPad, iPad 2 and the new iPad. Some Fisher-Price Apptivity items are compatible with iPhone or iPod Touch. Be sure to check toy packaging to see which devices are compatible for your specific toy.
|
First, ensure that the figure is specifically meant for the Apptivity WWE Rumblers game, and is not a regular Rumblers figure. You will be able to tell whether it is for Apptivity by looking for the base that the figure sits on. Only the figures with a base will work with the game.
Check the bottom of the base for debris, and wipe it with a clean, dry cloth.
Wipe your screen with a soft, dry cloth to ensure the best conductivity with the base.
Make sure you are holding the figure by the grips on its base in order for it to be recognized. Do not wear gloves or mittens since the grips need to come in contact with your fingertips.
Make sure that you are not placing the figure on the frame around the iPad screen. You must keep the figure only within the active screen area.
|
The IM-Me Unit may not connect to the internet for several reasons.
- There is a Firewall blocking the internet connection.
- Your router’s security is set to block other parties from accessing your internet connection.
In both of these cases, you will need to contact your security or internet provider for further assistance. When the IM-Me is connected the flower in the task bar will be green.
|
Click here for the assembly video.
|
If you are logged in and have not done anything at all on the site for 15 minutes, then your session on BarbieGirls.com automatically ends.
|