Use the circular stencil tool to add detail to your artwork. First fully insert the pen until you hear/feel it click and adjust the spray nozzle until you get a nice even spray. Then plug the circular stencil tool directly onto the end of the airbrush tip. Rotate the stencil to select the artwork that you would like to apply. The art should be centered over the spray tip and applied to the car in close range.
|
|
Push the handle on the far right counterclockwise all the way to the ground and the car platform will tip forward, allowing your car to roll out.
|
Medium 3M Command Mounting™ Refill Strips can be used to hang the Hot Wheels® Wall Track™ Playsets.
|
|
You should pull the car back so that your car stays in that location on the screen.
|
The booster needs to be correctly assembled to its designated wall bracket in order to function. The designated wall bracket has a notch on it. This notch ensures the motor only works when attached to the bracket. All other brackets are flat.
Watch set-up instructions for your track.
|
Instructional videos include a review of box contents, items you'll need to get started and helpful tips about Hot Wheels Wall Tracks.
|
There are many reasons that variations exist on the same Hot Wheels car model. For instance, changes may occur in mid-production as a result of a licensing issue or a manufacturing change.
|
Click here for instructions on how to clear app data on your tablet.
|
The WWE Power Slammers Ring is supposed to get scuffed up after the figures wrestle, on purpose, to show “battle damage”.
|
-
If you cannot press the handle down, have an adult unplug the machine, wait ten seconds and then plug it back in to reset. Car Maker will automatically go into the cooling cycle. Do not unplug during this time. After you hear “Cooling Complete” and the door opens, try the following:
-
Check the mold for blockage. See CLEANING section in the instruction sheet.
-
Look into the front window on the machine. Ensure that there is a wax stick in the heating chamber and that the wax stick above it is properly aligned.
|
The various colored icons are meant to direct you to the different hangars in the Hot Wheels Test Facility. The red diamond icon takes you to the Search and Destroy Hangar, the yellow triangle icon takes you to the Long Jump Hangar, and the blue circle icon takes you to the Race Hangar. The green tool icon will allow you to upgrade your vehicle in the workshop.
|
You need the appropriate piece of equipment, such as a flotation device, big-wheel tires or wings, to access certain areas. You can get this equipment in the Workshop, which you can find by following the green tool icon, then pressing the action button once you arrive at the Workshop hangar.
|
To cover existing paint or color you will need to apply multiple coats. First paint a thin, light coat and let it dry. Then repeat the process until you get the paint coverage you want.
|
-
You can customize your vehicle in the workshop. Follow the green tool icon to find the workshop hangar.
-
There are multiple types of customizations that you can make:
-
One-shots are one-time game modifiers that you can use to improve your performance, such as nitro bursts that give you faster speed. However, after you use a one-shot, you no longer have it anymore. You would need to unlock another one to use it again.
-
Add-ons are customizations that can be used forever on your vehicle, such as tires or weapons. Once you have unlocked them, they are permanently available for your use.
-
In order to modify your vehicle in the workshop, tap any icon in the circle with your finger and it will take you to the page where you can unlock it, if you have enough credits.
-
You can purchase more credits to unlock specific one-shot or add-on modifications. Once add-ons are purchased, they will always be available to equip your car.
|
You should hear/feel it click when you push the pen down into its slot on the spray gun.
|
Mattel does not sell Treasure Hunt cars directly to consumers. All of these vehicles are limited in quantity and subject to availability.
|
When the WWE Power Slammers figures are connected, cranked up and the head is pushed to start, they start to move, but then get caught or don’t move.
-
For the Thunder Twisting figures, John Cena, Zack Ryder and Sheamus, make sure the arm is straight before you push the head to start the wrestling. If the arm is bent it causes the figures to get caught and not wrestle.
|
You need to fine tune the spray nozzle by turning the adjustment nozzle all the way to the negative side (-). Then while holding the trigger down, slowly adjust the nozzle toward the positive side (+) until you get a nice even spray. You should also make sure that the pen is fully inserted by pushing it all the way into the slot on the spray gun until you hear/feel it click.
|