If you notice a crack in the propellers, do not operate toy. Dispose broken parts properly and contact Mattel Consumer Services for a replacement.
|
No. If you notice a crack in the propellers, please contact Mattel Consumer Services for a replacement.
|
Try replacing batteries and make sure there are no cracks in the propellers. If there is a crack in the propeller, do not operate toy. If your cat is still not flying, please contact Mattel Consumer Services.
|
|
The joystick directions match the direction that Barbie is facing, rather than the direction that the operator is facing. If Barbie is facing away from you and you move the joystick forward, Barbie will fly away from you. If she is facing towards you and you move the joystick forward, she will move towards you.
|
Turn on hoverboard and place it on a flat surface, and then controller to the ON position. Wait for the beep. Once the green light is on, the controller will stop flashing and the devices are paired.
|
The battery pack is located on the doll’s back. Remove the skirt and vest, bend the doll’s arms gently if needed. Unscrew the battery cover at the back with a Philips head screwdriver and replace. Be sure to dispose of batteries properly.
|
You will need a powered USB port from a computer, laptop or USB charger.
|
Turn off both devices and repeat pairing steps. Reference the instruction sheets provided in the package.
|
Four AAA batteries are required, but are not included.
|
No. Mattel meets or exceeds all safety guidelines developed and enforced by the Consumer Product Safety Commission, a government regulatory agency. For additional information on safety and sustainability, consumers can go to our website http://citizenship.mattel.com and then click on Safe and Sustainable Products.
|
Fully charged, the Barbie™ Star Light Adventure RC Hoverboard will fly for about 7 minutes.
|
2.4 GHz.
|
The remote should last for hours of play if it is turned off properly after play each time.
|
The Star Light Adventure Galaxy Barbie® Doll & Hover Cat will fly freely. The maximum distance it will fly is 18.5 inches from the doll. The flying pattern can be affected by elements such as wind or heat.
|
The Barbie™ Star Light Adventure RC Hoverboard is meant for indoor use. The toy may not work properly when used outdoors and will be affected by wind and/or heat.
|
Propellers can be re-attached by following the instructions provided in the box. Be sure to match the color of the propellers to the axles and that the silver is on the top. Press the propeller gently into the clips of the axles.
|
If Barbie™ Star Light Adventure RC Hoverboard keeps moving after launching, use the Trim buttons, located around the joystick to adjust. Press Trim button in opposite direction where Barbie™ Star Light Adventure RC Hoverboard moves until it remains still in the air. Press once and wait a few seconds until it is stabilized.
|
To fully charge, the hoverboard should be to be plugged in for about 90 to 120 minutes. To charge, please reference instruction sheets or demo video on YouTube.
|
No. Barbie is attached to the hoverboard.
|