|
If you don't keep up with the mini-game, then the attack can backfire. Do the best you can to get the best results for your Secret Attack. If you are having trouble with a particular mini-game, you can either work on your skills in Practice or else try to use abilites that use a different type of mini-game.
|
Checking for Updates
- Hello Barbie™ will check for updated when connected to the charging station and plugged in, and also connected to WiFi.
- Please connect Hello Barbie™ and wait a few minutes to make sure any updated are applied.
- You won't need to do anything else nor will you see anything different happen. When Hello Barbie™ starts talking, any update has been successfully applied.
|
|
The Twilight Saga: Breaking Dawn - Part 1 Bella Doll is inspired by the movie and wears the engagement ring on the same hand Bella does in The Twilight Saga Breaking Dawn Part 1 film.
|
|
|
|
|
|
We create the story starter backgrounds by taking screenshots within Minecraft itself, printing them out and placing them behind and under the figures.
|
|
This means there is a figure waiting to be scanned. When you tap the tile, it will let you know which toy you need to unlock that content.
|
|
|
|
You have the option of either rendering your comic as a video through the icon on the upper right hand of the Edit Comic screen and viewing them on your device or read through them within the app through the My Comics page.
|
|
|
It does not, all your comics are saved under the My Comics page located on the lower left hand side of the main screen.
|
The Imaginext® DC Super Friends™ RC Transforming Bat Bot’s remote is shipped without batteries, so please be sure to place two AAA batteries into the remote. Also, there is a clear plastic packaging tab that is attached to the outer leg of the non-battery leg of the robot. The tab should come out of the leg when removed from the box; however, it’s possible that a piece of the plastic remained in the slot on the leg. Please check the slot, which is located behind the front wheel. If you see clear plastic protruding from the slot, carefully remove it with tweezers, and turn the toy off and on again. This should clear the slot and make the toy function as it normally should.
|
|
A different block comes with each toy, on the bottom is a black and white marker. Open Unlock Rewards within the app, line this marker up and unlock your sounds, story starter and sticker.
|
|
To protect your privacy, all personally identifying information relating to the Sproutling product will be deleted from our servers. That also means you won't have access to your historical sleep data in the app after October 31, 2018.
|
Try to increase or decrease ambient lighting. Scanning may function better in different light, depending on the device used. Position the device at mid-range from the sticker, wait for the camera to focus, then slowly back away and/or move closer to optimize the zoom. Make sure your camera lens is clean.
|
|
The marker can be found under the block that comes with each figure. Each core Mattel Minecraft figure comes with the marker ready to be scanned.
|
|
|
|
|
|
|
If your DVD player is not responding to your Read With Me™ controller please try the following:
- Make sure you have setup Read With Me™ controller correctly. The quick setup sheet can be found at www.service.fisher-price.com and the latest list of codes can be found at www.service.fisher-price.com
- Try moving your Read With Me™ controller closer to the TV.
- Replace the batteries on your Read With Me™ controller.
- Make sure your Read With Me™ controller is pointed directly at your DVD player.
- Always be sure your hand and the activity card are not covering the red window on the front of the Read With Me™ controller when pressing a button to respond to an activity.
- Make sure there are no large objects between your Read With Me™ controller and your DVD player. Large objects can block the signal between your controller and DVD player.
- Double check that the 3-position memory switch on the underside of your Read With Me™ controller is in the proper position. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|
