Fully charged, the Star Light Adventure Galaxy Barbie® Doll & Flying Cat will fly for about 20 minutes.
|
Carefully check the packaging of the playset. This piece is packaged in the same bag along with the top and bottom jaw pieces. It is wrapped in paper and then in bubble wrap. It resembles a white tongue depressor, rolled in bubble wrap.
|
The WWE Power Slammers Ring is supposed to get scuffed up after the figures wrestle, on purpose, to show “battle damage”.
|
-
If you cannot press the handle down, have an adult unplug the machine, wait ten seconds and then plug it back in to reset. Car Maker will automatically go into the cooling cycle. Do not unplug during this time. After you hear “Cooling Complete” and the door opens, try the following:
-
Check the mold for blockage. See CLEANING section in the instruction sheet.
-
Look into the front window on the machine. Ensure that there is a wax stick in the heating chamber and that the wax stick above it is properly aligned.
|
The various colored icons are meant to direct you to the different hangars in the Hot Wheels Test Facility. The red diamond icon takes you to the Search and Destroy Hangar, the yellow triangle icon takes you to the Long Jump Hangar, and the blue circle icon takes you to the Race Hangar. The green tool icon will allow you to upgrade your vehicle in the workshop.
|
https://qservice.corp.mattel.com/us/Docs/
|
As released publicly in Mattel’s 2012 Corporate Citizenship Report, Mattel is committed to advancing the use of sustainably-sourced paper and wood fiber in our packaging and products. Mattel continues to work to roll this out across our packaging, products and business. Mattel will continue to work to align wood products with the principles.
|
You need the appropriate piece of equipment, such as a flotation device, big-wheel tires or wings, to access certain areas. You can get this equipment in the Workshop, which you can find by following the green tool icon, then pressing the action button once you arrive at the Workshop hangar.
|
https://qservice.corp.mattel.com/us/Docs/
|
To cover existing paint or color you will need to apply multiple coats. First paint a thin, light coat and let it dry. Then repeat the process until you get the paint coverage you want.
|
You should hear/feel it click when you push the pen down into its slot on the spray gun.
|
The UCreate™ Music uses a mini 5 pin USB cable.
|
Elsa’s shoes are packed out separately in a poly bag that is taped to the packaging behind the doll.
|
Mattel does not sell Treasure Hunt cars directly to consumers. All of these vehicles are limited in quantity and subject to availability.
|
https://qservice.corp.mattel.com/us/Docs/
|
You need to fine tune the spray nozzle by turning the adjustment nozzle all the way to the negative side (-). Then while holding the trigger down, slowly adjust the nozzle toward the positive side (+) until you get a nice even spray. You should also make sure that the pen is fully inserted by pushing it all the way into the slot on the spray gun until you hear/feel it click.
|
|
|
After you’ve airbrushed your car, lower the turntable into the drying chamber by turning the handle on the far right counterclockwise toward the ground. Rotate the knob outside the chamber all the way to the rightmost setting to turn the fan on. Air will blow inside the drying chamber and dry off your car!
|
|