|
-
Touch the screen with your finger to move forward to the next page.
-
If the game keeps freezing, try doing a hard reset.
-
Click the home button on your iPad to get to the home screen.
-
Then double-click the home button again. The multitasking bar will appear.
-
Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button.
-
Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
|
The Hot Wheels Car Maker Troubleshooting Guide will help with any questions that arise during the car making process.
|
https://qservice.corp.mattel.com/us/Docs/
|
First insert the flexible stencils into the frame with the built-in peg fitting. Connect the frame onto the four posts on top of the car decoration turntable, and then adjust the height of the frame for tall and low cars by using the two detent locations. Remember that in order to spray using stencil, the airbrush must face directly down over the top of the car and spray through the stencil.
|
The enter button on your DVD remote may also be called select, set, return, etc.
|
- If you have inserted different colored wax sticks next to each other, you may get some color blending (in which the wax from the two adjacent sticks mix when creating the car body).
|
Our monitors should only be used with Fisher-Price wall adapters to ensure the safety of the monitor.
Adapters should only be replaced with an original Fisher-Price wall adapter. If you need to purchase an adapter, please visit our online store.
|
You should place the Apptivity Hot Wheels car on the screen in that location in order to play.
|
-
Once Car Maker instructs you to pull the handle, you must immediately pull it all the way down in one continuous motion until you hear “Complete.” For best results, DO NOT pump handle when pulling it down and complete the injection within 2-3 seconds. If you do not pull it all the way down to complete the injection, Car Maker will keep repeating the phrase, “Please pull down handle.”
|
There is a silver-colored speed control button on the lower left side of the screen. The image on it is a gear box. Tap the button to move from “Stop” mode to “Slow” and “Fast” modes.
|
-
From your iPad home screen, go to Settings, General, then Multitasking Gestures. Turn off Multitasking Gestures.
-
Make sure that you do not press the car down on the iPad home button, as that will close the game.
|
|
|
https://qservice.corp.mattel.com/us/Docs/
|
Make sure the pen is fully inserted by pushing it all the way into the slot on the spray gun until you hear/feel it click. Start spraying with the nozzle adjuster pointed all the way toward the negative side (-) and, while holding the trigger down, slowly move the adjuster toward the positive side (+) until you get a nice even spray. If you’re still having issues, please refer to the troubleshooting section below.
|
Your current room design doesn’t include a bed, and you’ve put furni in that extra space. Before changing your room design to one that does include a bed, you need to move items out of the way. Your bed will always go in the same place.
|
Use the circular stencil tool to add detail to your artwork. First fully insert the pen until you hear/feel it click and adjust the spray nozzle until you get a nice even spray. Then plug the circular stencil tool directly onto the end of the airbrush tip. Rotate the stencil to select the artwork that you would like to apply. The art should be centered over the spray tip and applied to the car in close range.
|
|
You should pull the car back so that your car stays in that location on the screen.
|