|
You should pull the car back so that your car stays in that location on the screen.
|
The booster needs to be correctly assembled to its designated wall bracket in order to function. The designated wall bracket has a notch on it. This notch ensures the motor only works when attached to the bracket. All other brackets are flat.
Watch set-up instructions for your track.
|
Instructional videos include a review of box contents, items you'll need to get started and helpful tips about Hot Wheels Wall Tracks.
|
There are many reasons that variations exist on the same Hot Wheels car model. For instance, changes may occur in mid-production as a result of a licensing issue or a manufacturing change.
|
Click here for instructions on how to clear app data on your tablet.
|
The WWE Power Slammers Ring is supposed to get scuffed up after the figures wrestle, on purpose, to show “battle damage”.
|
Connect the controller to a powered USB port with the supplied USB cable. Attach the power cable located inside the controller to Barbie™ Star Light Adventure RC Hoverboard. Set the toy to OFF position and controller in “charging” position (left). Charging light should be in red and turns green when it is fully charged.
|
|
If this occurs during the Hello Barbie™ setup process, make sure the doll is properly charged. Hello Barbie™ should remain in the charging station and connected to power during the setup.
When putting Hello Barbie™ into connection mode, make sure you see white flashing lights (they may also look light blue) If the lights flash (royal) blue, Hello Barbie™ has been reset and will automatically say "My batteries need to recharge. Please connect me to the charging station." Connect Hello Barbie™ to the charger and continue putting her into connection mode.
If this occurs during conversations or red lights appear, connect Hello Barbie™ to her charger, make sure that the charging cable is firmly connected to the doll, and that the orange charging indicator is illuminated.
|
A. We recommend using alkaline batteries with our products, as they are great for long-term use and help optimize performance. We don't recommend using Carbon-Zinc batteries. While Carbon-Zinc batteries may work well with low-power devices, they can drain after a short period of time and cause certain products to not function properly.
|
We recommend using alkaline batteries with our products, as they are great for long-term use and help optimize performance. We don't recommend using Carbon-Zinc batteries. While Carbon-Zinc batteries may work well with low-power devices, they can drain after a short period of time and cause certain products to not function properly.
|
To control the Batmobile with another device, you will need to perform a factory reset of the Batmobile RC vehicle. **The Batmobile needs to be on all four wheels to do the reset.** The battery compartment is located on the left side of the vehicle. Remove the battery door and locate the small hole on the bottom left hand corner of the battery housing. While the Batmobile vehicle is turned ON, insert and press down the reset button located in the recessed area for 10 full seconds using a paperclip or similar sized tool. After holding down for 10 full seconds, release the button, wait 3 seconds and then cycle the Batmobile OFF and then back ON, and follow the "new user" instructions to connect to the Batmobile in the Batmobile RC Controller app.
|
https://qservice.corp.mattel.com/us/Docs/>A. We recommend using alkaline batteries with our products, as they are great for long-term use and help optimize performance. We don't recommend using Carbon-Zinc batteries. While Carbon-Zinc batteries may work well with low-power devices, they can drain after a short period of time and cause certain products to not function properly.
|
Our server has been receiving a high volume of traffic due to the holiday, which caused some users to experience
service issues. Our engineers managed to identify and resolve many of these issues, but intermittent problems may
still exist as we continue to increase capacity.
If you're still experiencing issues, we recommend that you power cycle the Barbie Hello Dreamhouse by turning the
Dreamhouse off for 15 seconds and then powering it back on.
We are very sorry for the inconvenience this has caused you and your family, and appreciate your patience as we
get this resolved.
|