Our helpful Assembly and Set-up Video walks you through everything you need to know to get your little cyclist spinning. You can view the video on our website — scroll down the page for that and other helpful video tips!

You can view the source code and related licenses for the Smart Connect™ App on our service website.

You can view an instructional video on our YouTube channel that will help guide you through the assembly of your Bright Beats Smart Touch Play Space!  Here's the link to the video:

https://www.youtube.com/watch?v=6AJjKhGPJSs

Try each of the codes listed under "ALL MODELS" for your DVD player's manufacturer until you find one that can work properly for all shapes on the test screen and both the skip ahead and skip back on the Read With Me™ controller.

Follow the steps below:

•  Confirm the Batmobile vehicle’s battery is charged and the power is turned “ON”

•  Confirm the Batmobile RC Controller App is installed, and open the app.

•  Once the app is open, Select “Novice Pilot” and follow the following on screen instructions.

•  Tap the “Default Password” button to copy

•  Tap on “WiFi Settings” to access your mobile device’s Settings Menu

•  Once in your device’s Settings Menu, navigate to “WiFi Settings”

•  Once in “WiFi Settings”, confirm your WiFi is turned “ON”

•   Select the “Batmobile” WiFi network.  It will be labeled with four alphanumeric characters followed by “-Batmobile”.  EX:  “1234-Batmobile” 

•   Paste your default password into the field, and tap “JOIN”

•   Once the Batmobile WiFi network is joined, navigate back to the Batmobile RC Controller application.

•   After a moment, a new, randomized password will be generated for your security.

•   Tap the new password button to copy

•   Tap on “WiFi Settings” to access your mobile device’s Settings Menu

•   Once in your device’s Settings Menu, navigate to “WiFi Settings”

•   You will be automatically disconnected from the Batmobile WiFi.  Select it again to connect.

•   Paste the unique password into the field, and tap “JOIN”

•   Once the Batmobile WiFi network is joined, navigate back to the Batmobile RC Controller application.

•   The Batmobile vehicle controls and video feed will appear, and the WiFi setup process is complete.

• If you cannot press the handle down, have an adult unplug the machine, wait ten seconds and then plug it back in to reset. Car Maker will automatically go into the cooling cycle. Do not unplug during this time. After you hear “Cooling Complete” and the door opens, try the following:
• Check the mold for blockage. See CLEANING section in the instruction sheet.
• Look into the front window on the machine. Ensure that there is a wax stick in the heating chamber and that the wax stick above it is properly aligned.

• If your car body came out only partially completed, see instructional video or try the following:
• Ensure you are inserting enough wax sticks into the machine and they are positioned next to each other in the proper alignment (point side down).  Remember, it’s normal for one of the wax sticks to protrude from the top.
• Ensure the handle is pulled all the way down in one continuous motion and the injection is completed within 2-3 seconds until you hear “Complete.”

• Ensure the mold has been thoroughly cleaned before starting your cycle.

• If you hear “Error,” ask an adult to unplug Car Maker from the wall, wait ten seconds and then plug it back in to reset. Car Maker may automatically go into the cooling cycle. Do not unplug during this time. If you continue to hear “Error” after multiple resets, this may be an indication of a mechanical problem with the door switch; please contact Consumer Services via service.mattel.com for assistance.

• You need to hold the door closed and press the button above it to lock the door. Do not try to open the door during the heating or cooling cycle when it is locked.