To control the Batmobile with another device, you will need to perform a factory reset of the Batmobile RC vehicle. **The Batmobile needs to be on all four wheels to do the reset.** The battery compartment is located on the left side of the vehicle. Remove the battery door and locate the small hole on the bottom left hand corner of the battery housing. While the Batmobile vehicle is turned ON, insert and press down the reset button located in the recessed area for 10 full seconds using a paperclip or similar sized tool. After holding down for 10 full seconds, release the button, wait 3 seconds and then cycle the Batmobile OFF and then back ON, and follow the "new user" instructions to connect to the Batmobile in the Batmobile RC Controller app.
|
Our server has been receiving a high volume of traffic due to the holiday, which caused some users to experience
service issues. Our engineers managed to identify and resolve many of these issues, but intermittent problems may
still exist as we continue to increase capacity.
If you're still experiencing issues, we recommend that you power cycle the Barbie Hello Dreamhouse by turning the
Dreamhouse off for 15 seconds and then powering it back on.
We are very sorry for the inconvenience this has caused you and your family, and appreciate your patience as we
get this resolved.
|
If all codes in the instruction manual have been tried unsuccessfully or your brand of DVD player is not listed, it is possible that the code for your DVD player may still be in the controller. You may be able to find the code using the manual search method.
- Make sure the controller has good batteries and slide the 3 position memory switch on the back of the controller to the desired memory position.
- Insert the compilation DVD into the DVD player and turn on the DVD player and TV.
- Insert the programming card into the controller, the green light should blink twice.
- Point the controller at the DVD player and press the left arrow key.
- Continue to press the left arrow key at a 1 second interval. Be sure to watch to see if the power to the DVD player turns off.
- If the power to the DVD player turns off stop and remove the programming card. Turn the DVD player back on. Play the disk and allow the DVD footage to play through until it gets to the screen, which shows the 5 different activity cards.
- Insert the test card into the controller, the green light should blink twice.
- The DVD should skip to the test screen, if it does not remove the test card and re-insert the programming card and continue from step 5.
This process may take a while. If you press the left arrow button more than 300 times and the green light no longer blinks, it is possible that your DVD player's code is not supported by this version of the controller. Verify version and if new version includes more codes for their DVD player. If so, send a new controller. If no new codes have been added to their brand of DVD player, you will need to follow the service policy, return for voucher or refund.
If the test card skips to the footage, which resembles the test card then proceed with testing the controller. See Testing the unit section of your manual or quick set up instructions.
|
In career mode or exhibition mode, look for black track-pad with chevron arrows at bottom or side of the screen. Move your figure back and forth along the track-pad rapidly to grapple, pin, or toss a Superstar out of the ring.
In the specialty matches, move your figure back-and forth along the track-pad rapidly to catch up to the opposing Superstar, or to increase your power against him.
|
Click the link below and follow these instructions to update your Tech Touch Lightning McQueen.
https://service.mattel.com/us/Docs/Tech_Touch_Lightning_McQueen_Unlock.exe
- Click the "Download App" button to download the update to your PC.
- Click "Save" to save the app.
- Tech_Touch_Lightning_McQueen.zip will download to your Downloads folder. Double click this file.
- Click to “Run” the app if prompted by your Internet browser.
- A window may open, saying: “Windows protected your PC.” If you see this window, click “More Info”, then "Run Anyway,"
- The app should open.
- Make sure Tech Touch Lightening McQueen has batteries installed.
- Connect Tech Touch Lightning McQueen to PC with included USB cable.
- Press Tech Touch Lightning McQueen’s button to power him on. A USB symbol should appear.
- Click the “Update” button in app. Keep Tech Touch Lightning McQueen plugged in.
- When “Update Completed!” appears, exit the app.
- Unplug Tech Touch Lightning McQueen. Enjoy three (3) new race tracks from Cars 3 -- Midnight Run, Willy’s Butte, & Victory Lap!
|
It is possible that the units simply need to be reset or paired.
1. Press the pairing button on the side of the receiver with a paperclip until the power button L.E.D. blinks and the range indicator turns on.
2. Press the pairing button on the back of the transmitter with a paperclip until the receiver range indicator turns off.
|
The Imaginext® DC Super Friends™ RC Transforming Bat Bot’s remote is shipped without batteries, so please be sure to place two AAA batteries into the remote. Also, there is a clear plastic packaging tab that is attached to the outer leg of the non-battery leg of the robot. The tab should come out of the leg when removed from the box; however, it’s possible that a piece of the plastic remained in the slot on the leg. Please check the slot, which is located behind the front wheel. If you see clear plastic protruding from the slot, carefully remove it with tweezers, and turn the toy off and on again. This should clear the slot and make the toy function as it normally should.
|
You automatically earn one virtual object with each figure you use. In power play mode, you can look at the drop down menu where as you win against each opponent, you also earn their object.
Put the object down on the “+” icon to unlock it. Once you have unlocked it, you can access it during future Power Play modes.
Items in blue are available to use. Items in grey are objects that you have not earned/unlocked with the specific Apptivity WWE Rumblers figure you are using. Objects in orange are those that you have selected to use.
|
While we don’t have historical information, pictures, or resale value information here, you can find a wealth of information online.
For Fisher-Price products, you might also want to check out the book, Fisher-Price: Historical, Rarity, and Value Guide, 1931-Present, Updated 3rd Edition.
For Hot Wheels, you can also log on to www.hotwheelscollectors.com. At the top, click on “Forums” to connect to other Hot Wheels collectors who might be able to help you out.
For Barbie, you can find a ton of articles and stories on our blog at www.barbie.com that will give you an inside look at our dolls. There, you can also connect with other collectors who might be able to help you out. If you click on “Signature” at the top, then “Get Involved,” it will take you to a page where you can find Collector Clubs in your area.
|
There are a lot of different trophies awarded to racers by the Hot Wheels Racing Ciruit™, each for a different reason. Here are the trophies you can win, along with the keys to winning them! Champion:
- Master the track by coming in first to unlock the Champion Trophy!
Brawler:
- Do the most damage in a single race and unlock the Brawler Trophy!
Collector:
- Grab all three coins in a race and unlock the Collector Trophy!
Pacifist:
- Win a race without using your weapons and earn the Pacifist Trophy!
Hide and Seek:
- Find the hidden trophy on the racetrack and win the Hide and Seek Trophy!
Beat That! :
- Accept a Beat That Challenge and win the race to unlock the Beat That Trophy!
Beat That II :
- Challenge a friend to a Beat That Challenge and win and you'll unlock the Beat That II Trophy!
Mystery:
- Obviously, this one is a mystery. We're not telling!
|