·         The action button is the button on the top of the figure’s base that you can press down in order to advance dialogue, use your character’s special ability in the game, and interact with your environment. 

The Twilight Saga: Breaking Dawn - Part 1 Bella Doll is inspired by the movie and wears the engagement ring on the same hand Bella does in The Twilight Saga Breaking Dawn Part 1 film.

No. None of the features of the Sproutling device will function after October 31, 2018

 

The Barbie™ Star Light Adventure RC Hoverboard will fly about 5 meters or 17 feet from the surface it launches from.

Yes! You just need to go to the Dino Compound from the Command Center. Once you are in the Dino Compound, you'll see a console at the bottom of the screen. Select the hybrid you want to change, then click on the "Creator" button and it will take you to the Hybrid Creator so you can change your hybrid.

Propellers can be re-attached by following the instructions provided in the box. Be sure to match the color of the propellers to the axles and that the silver is on the top. Press the propeller gently into the clips of the axles.

The Star Light Adventure Galaxy Barbie® Doll & Hover Cat will fly freely. The maximum distance it will fly is  18.5 inches from the doll. The flying pattern can be affected by elements such as wind or heat.

When playing the game, lift your figure or fingers off the screen for at least 4 seconds, and the pause menu will appear.

 

Tap the purple lips to turn off either all sound or the music only.

 

Alternatively, you can turn off all sound on your iPad using the hardware switch on the side of your device.

No, unless you are playing with your fingers. Each figure can only be used in that specific character’s game.

Limited edition dolls are produced in quantities of 35,000 or less and Collectible dolls are produced in quantities greater than 35,000. Exact production numbers are never released to the public.

Washing instructions can typically be found on the care label attached to the pad assembly or toward the end of each product manual.

Product manuals can be found online, by clicking here.

1. Enter the product number or toy name, or search by using the keywords below. Then click "Go."  

2. Identify your product from the list of results.  

3. Click on the product image, and follow the link to download the manual. 

All our baby gear has a product number listed in small print near where the Fisher-Price® or Mattel information is stamped. It can usually be found above the barcode on the packaging and instructions, on the fabric tag, or etched into the product itself.

Our product manuals are available in Adobe^® Acrobat^® format (PDF). If you don’t have the free viewing software, Adobe^® Reader^®, this link will take you to their website for assistance.

The features of the band and Smart Charger will no longer function after October 31, 2018.

From your iPad home screen, go to Settings, General, then Multitasking Gestures. Turn off Multitasking Gestures.

 

Make sure that you do not press the figure down on the iPad home button, as that will close the game.

Hello Barbie™ can store up to three WiFi networks.  To add additional WiFi networks, please follow the steps below:

• Have the Hello Barbie™ Doll and the Companion App near one another
• Open the Hello Barbie™ Companion App on your device
• On the "Manage Hello Barbie™" screen, tap the "Manage WiFi Connection" button
• Follow the in-app steps to add additional WiFi Networks

Check the file type.  Barbie Doll'd Up Nails app does not support TIFF files.

Watch Monster High designer Garrett Sander and engineer Andrew Lourits walk you through the assembly process.

You can see your hybrids in the Dino Compound.

Hello Barbie™ may occasionally encounter issues sending and receiving conversations.  The issues may be based on signal strength, roaming, or Internet congestion.  Usually the issues are brief and Hello Barbie™ will resume operation quickly.  This can also occur when Hello Barbie™ has been in connection mode for along time or has timed out after a long period of inactivity.  Turning Hello Barbie™ off and on again will enable the doll to resume normal activity.

This may also happen if Hello Barbie™ loses its WiFi connection.  Please take the following steps:

• Close the Companion App
• Go to your devise's WiFi settings
• Reconnect to your WiFi network

In addition, you may get this message if Hello Barbie's batteries are low.  If this is the case, please place Hello Barbie™ back on her charger.

Here are some tips that may help you during the quick setup:

• Make sure you are using fresh alkaline batteries inside your InteracTV controller.
• If you have followed the instructions on the quick setup sheet and your InteracTV controller is still not working with your DVD player, try the setup sheet again from the beginning. It is possible that one of the numbers did not register when you entered in your DVD code.
• When pressing the numbers on the programming card, make sure your press each number firmly and slowly. The green light on your controller should blink one time after each number is pressed. When the fourth digit is pressed, make sure the green light on your InteracTV controller blinks one long blink. If you do NOT see this long blink, remove the programming card, re-insert it into the controller and try the same code again.

InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.

Follow the steps below:

 

•  Confirm the Batmobile vehicle’s battery is charged and the power is turned “ON”

•  Confirm the Batmobile RC Controller App is installed, and open the app.

•  Once the app is open, Select “Novice Pilot” and follow the following on screen instructions.

•  Tap the “Default Password” button to copy

•  Tap on “WiFi Settings” to access your mobile device’s Settings Menu

•  Once in your device’s Settings Menu, navigate to “WiFi Settings”

•  Once in “WiFi Settings”, confirm your WiFi is turned “ON”

•   Select the “Batmobile” WiFi network.  It will be labeled with four alphanumeric characters followed by “-Batmobile”.  EX:  “1234-Batmobile” 

•   Paste your default password into the field, and tap “JOIN”

•   Once the Batmobile WiFi network is joined, navigate back to the Batmobile RC Controller application.

•   After a moment, a new, randomized password will be generated for your security.

•   Tap the new password button to copy

•   Tap on “WiFi Settings” to access your mobile device’s Settings Menu

•   Once in your device’s Settings Menu, navigate to “WiFi Settings”

•   You will be automatically disconnected from the Batmobile WiFi.  Select it again to connect.

•   Paste the unique password into the field, and tap “JOIN”

•   Once the Batmobile WiFi network is joined, navigate back to the Batmobile RC Controller application.

•   The Batmobile vehicle controls and video feed will appear, and the WiFi setup process is complete.