After a hard day of fighting Megavores™, your dinosaurs need some medical attention. Still, it's a good idea to keep your distance. Shoot the correct medical packs at your patients and have them feeling better again in no time!
|
While we don’t have historical information, pictures, or resale value information here, you can find a wealth of information online.
For Fisher-Price products, you might also want to check out the book, Fisher-Price: Historical, Rarity, and Value Guide, 1931-Present, Updated 3rd Edition.
For Hot Wheels, you can also log on to www.hotwheelscollectors.com. At the top, click on “Forums” to connect to other Hot Wheels collectors who might be able to help you out.
For Barbie, you can find a ton of articles and stories on our blog at www.barbie.com that will give you an inside look at our dolls. There, you can also connect with other collectors who might be able to help you out. If you click on “Signature” at the top, then “Get Involved,” it will take you to a page where you can find Collector Clubs in your area.
|
If Barbie™ Star Light Adventure RC Hoverboard keeps moving after launching, use the Trim buttons, located around the joystick to adjust. Press Trim button in opposite direction where Barbie™ Star Light Adventure RC Hoverboard moves until it remains still in the air. Press once and wait a few seconds until it is stabilized.
|
-
The very first time you use Car Maker, you need to insert 2 wax sticks. Car Maker comes pre-loaded with 1 wax stick. The second stick you insert is not meant to fit completely inside the machine – it will protrude through the top. After you have made your very first car, only 1 additional wax stick needs to be inserted every time. Please note that ALL wax sticks must be inserted with the point side down.
|
https://qservice.corp.mattel.com/us/Docs/>A. We recommend using alkaline batteries with our products, as they are great for long-term use and help optimize performance. We don't recommend using Carbon-Zinc batteries. While Carbon-Zinc batteries may work well with low-power devices, they can drain after a short period of time and cause certain products to not function properly.
|
If this occurs during the Hello Barbie™ setup process, the WiFi SSID name or the WiFi password was possibly entered incorrectly. Select the "Manage WiFi" option to add the correct SSID name and password.
If the issue occurs during conversations and/or Hello Barbie's lights are flashing yellow you may need to move the doll closer to the WiFi router/modem. Hello Barbie's lights will flash yellow if the WiFi signal is getting weaker.
|
Call the number on the back of the instructions that came with your Barbie Girl™. After your purchase has been verified you’ll be issued a new registration code.
|
The remote should last for hours of play if it is turned off properly after play each time.
|
After the figures are connected, cranked up and the head is pushed, the “wrestling” feature does not last long.
- Crank the lever clockwise until it clicks, usually about 11 times, for full power battling.
|
After the game has finished (or when prompted to save) select the export option from the menu. The program will then display the location that the file will be saved to on your computer (C: \ Documents and Settings \ My Documents \ Ucreate). The project file will be saved with an extension based on the game type (name.pz = puzzle file, name.mua = mash-up, name.bd = ball drop, name.pb = pinball). Next, attach this file to an e-mail and send it to your friend. Your friend can then import the file to their Ucreate game to play the file. See steps above for importing a file. Note: they will need a UCreate unit to view and play the files.
|
Exercise your dinosaur in this high-tech supercharged simulation! Help your dinosaur avoid falling debris while catching tasty snacks!
|
Follow these steps:
-
Per the instruction sheet, the wing pack with missile figure must be properly locked into place first. A click sound will indicate that it’s properly locked.
-
While cranking the dial clockwise, you will hear a slight clicking noise. You will hear a LOUD click after several turns.
-
For the best launch, crank the dial clockwise until you hear the second LOUD clicking noise. This will be after at least 7 full revolutions, which equates to about 14 turns (2 turns per revolution).
-
After cranking the dial, ensure that wing pack is still locked into place.
-
For maximum distance, angle the toy so the missile figure is at a 30 degree angle. Then press the button to launch.
|
Click
Press the spacebar as many times as you can before the time runs out.
Single Timing
The pointer moves around in a circle. When it is pointing at the yellow line, click (or press the spacebar). The cloaser to the middle of the line you are, the better your attack will work.
Multi Timing
Same as Single Timing, but there is more than one line to hit. Hit them all for the best results.
Moving Timing
Same as Multiple Timing but the lines move around the circle, not just the pointer. This is the hardest version of the game!
Accuracy
Click all the targets that appear before time runs out.
Shooting Gallery
Hit the targets as they appear. Try to hit the middle for a bull's eye and extra points!
Cool-down
Each Secret Attack has a cooldown time. The cooldown time is how long you have to wait until you can use the attack again. after you use an attack, you will see the icon change to show the cooldown timer. When the cooldown timer disappears, you can use the attack again on your next turn. Secret Attacks have short, medium or long cooldowns.
|
If this occurs during the Hello Barbie™ setup process, make sure the doll is properly charged. Hello Barbie™ should remain in the charging station and connected to power during the setup.
When putting Hello Barbie™ into connection mode, make sure you see white flashing lights (they may also look light blue) If the lights flash (royal) blue, Hello Barbie™ has been reset and will automatically say "My batteries need to recharge. Please connect me to the charging station." Connect Hello Barbie™ to the charger and continue putting her into connection mode.
If this occurs during conversations or red lights appear, connect Hello Barbie™ to her charger, make sure that the charging cable is firmly connected to the doll, and that the orange charging indicator is illuminated.
|
-
You can customize your vehicle in the workshop. Follow the green tool icon to find the workshop hangar.
-
There are multiple types of customizations that you can make:
-
One-shots are one-time game modifiers that you can use to improve your performance, such as nitro bursts that give you faster speed. However, after you use a one-shot, you no longer have it anymore. You would need to unlock another one to use it again.
-
Add-ons are customizations that can be used forever on your vehicle, such as tires or weapons. Once you have unlocked them, they are permanently available for your use.
-
In order to modify your vehicle in the workshop, tap any icon in the circle with your finger and it will take you to the page where you can unlock it, if you have enough credits.
-
You can purchase more credits to unlock specific one-shot or add-on modifications. Once add-ons are purchased, they will always be available to equip your car.
|
Yes! Trackmaster engines will work off the track on flat surfaces and low pile carpet. they may not work (or not work well) on high pile or shag carpet.
|
To control the Batmobile with another device, you will need to perform a factory reset of the Batmobile RC vehicle. **The Batmobile needs to be on all four wheels to do the reset.** The battery compartment is located on the left side of the vehicle. Remove the battery door and locate the small hole on the bottom left hand corner of the battery housing. While the Batmobile vehicle is turned ON, insert and press down the reset button located in the recessed area for 10 full seconds using a paperclip or similar sized tool. After holding down for 10 full seconds, release the button, wait 3 seconds and then cycle the Batmobile OFF and then back ON, and follow the "new user" instructions to connect to the Batmobile in the Batmobile RC Controller app.
|
Our server has been receiving a high volume of traffic due to the holiday, which caused some users to experience
service issues. Our engineers managed to identify and resolve many of these issues, but intermittent problems may
still exist as we continue to increase capacity.
If you're still experiencing issues, we recommend that you power cycle the Barbie Hello Dreamhouse by turning the
Dreamhouse off for 15 seconds and then powering it back on.
We are very sorry for the inconvenience this has caused you and your family, and appreciate your patience as we
get this resolved.
|
Bigfoot’s battery should be charged for 4 hours. Charging Instructions:
- The LED light on the charger will remain red for 4 continuous hours after being plugged in.
- After 4 hours the LED will turn green.
Please Note: If the charger is unplugged after this time and plugged back in, the LED will turn red again for 4 hours even though the battery is fully charged. The LED is not an indicator as to whether the battery is fully charged.
|
The Camera/Printer busy error appears when there is a communication error between the printer and the computer. To correct this issue:
- Close the software
- Open Control Panel
- Open the Printers & Faxes
- Double-click the Mattel Barbie Doll’D Up Nails Printer
- Delete any nail prints that are in the queue
|