We'd like to let you know that there have been some design changes made to the Imaginext® DC Super Friends™ Batcave. The gray door located on the front upper portion of the Imaginext® DC Super Friends™ Batcave and telescope base was removed from the product and a rounded end has been added to the telescope. The rounded end will fit into one of the two hex fittings that have been added to the purple platform.
In order to lower the telescope in the elevator, you will need to put the ball on the bottom of the telescope into the raised hexagon opening and have the telescope facing forward. Tip it back and the elevator will now lower.
|
|
The disc, cord and instructions are located in the bottom portion of the Dora Links package. If any of these parts are missing contact Customer Service at 1-888-892-6123.
|
Product manuals can be found online, by clicking here.
1. Enter the product number or toy name, or search by using the key words below. Then click "Go."
2. Identify your product from the list of results.
3. Click on the product image and follow the link to download the manual.
All our baby gear has a product number listed in small print near where the Fisher-Price® or Mattel information is stamped. It can usually be found above the barcode on the packaging and instructions, on the fabric tag, or etched into the product itself.
Our product manuals are available in Adobe® Acrobat® format (PDF). If you don’t have the free viewing software, Adobe® Reader®, this link will take you to their website for assistance.
|
Washing instructions can typically be found on the care label attached to the pad assembly or toward the end of each product manual.
Product manuals can be found online, by clicking here.
1. Enter the product number or toy name, or search by using the keywords below. Then click "Go."
2. Identify your product from the list of results.
3. Click on the product image, and follow the link to download the manual.
All our baby gear has a product number listed in small print near where the Fisher-Price® or Mattel information is stamped. It can usually be found above the barcode on the packaging and instructions, on the fabric tag, or etched into the product itself.
Our product manuals are available in Adobe® Acrobat® format (PDF). If you don’t have the free viewing software, Adobe® Reader®, this link will take you to their website for assistance.
|
Please mix the powder for 45 – 90 seconds or until the powder is dissolved and begins to thicken to a pudding like consistency.
|
You only need to set up your InteracTV controller one time per DVD player. Your InteracTV controller can be set up to be played with up to three different DVD players. There is a 3-position memory switch on the underside of your InteracTV controller. Each position of the switch can be programmed to a different DVD player. Refer to your InteracTV User's Manual for instructions on how to use the 3-position memory switch.
InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.
|
Click the link below and follow these instructions to update your Tech Touch Lightning McQueen.
https://service.mattel.com/us/Docs/Tech_Touch_Lightning_McQueen_Unlock.exe
- Click the "Download App" button to download the update to your PC.
- Click "Save" to save the app.
- Tech_Touch_Lightning_McQueen.zip will download to your Downloads folder. Double click this file.
- Click to “Run” the app if prompted by your Internet browser.
- A window may open, saying: “Windows protected your PC.” If you see this window, click “More Info”, then "Run Anyway,"
- The app should open.
- Make sure Tech Touch Lightening McQueen has batteries installed.
- Connect Tech Touch Lightning McQueen to PC with included USB cable.
- Press Tech Touch Lightning McQueen’s button to power him on. A USB symbol should appear.
- Click the “Update” button in app. Keep Tech Touch Lightning McQueen plugged in.
- When “Update Completed!” appears, exit the app.
- Unplug Tech Touch Lightning McQueen. Enjoy three (3) new race tracks from Cars 3 -- Midnight Run, Willy’s Butte, & Victory Lap!
|
Here are some tips that may help you during the quick setup:
- Make sure you are using fresh alkaline batteries inside your InteracTV controller.
- If you have followed the instructions on the quick setup sheet and your InteracTV controller is still not working with your DVD player, try the setup sheet again from the beginning. It is possible that one of the numbers did not register when you entered in your DVD code.
- When pressing the numbers on the programming card, make sure your press each number firmly and slowly. The green light on your controller should blink one time after each number is pressed. When the fourth digit is pressed, make sure the green light on your InteracTV controller blinks one long blink. If you do NOT see this long blink, remove the programming card, re-insert it into the controller and try the same code again.
InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.
|
|
|
The booster needs to be correctly assembled to its designated wall bracket in order to function. The designated wall bracket has a notch on it. This notch ensures the motor only works when attached to the bracket. All other brackets are flat.
Watch set-up instructions for your track.
|
Click here to see the instructions on how to perform a hard factory reset on your tablet.
|
-
If you cannot press the handle down, have an adult unplug the machine, wait ten seconds and then plug it back in to reset. Car Maker will automatically go into the cooling cycle. Do not unplug during this time. After you hear “Cooling Complete” and the door opens, try the following:
-
Check the mold for blockage. See CLEANING section in the instruction sheet.
-
Look into the front window on the machine. Ensure that there is a wax stick in the heating chamber and that the wax stick above it is properly aligned.
|
|
Confirm your login information is correct and try again. If you forgot your password, click “forgot password?” to retrieve it. If you have a basic account and you forgot your username, you will need to re-register. If you have a Barbie Girl™ device and you forgot your username, call the number located on the back of the instructions that came with your Barbie Girl™. If your parent has set up a Parents’ Place account, you can also check out your account details or change your password with their help.
|
|
|
IMPORTANT, PLEASE READ THIS SECTION FIRST:
The instructions below are only intended for users of Version 3.0 or higher. If you have are using Version 2.0 or lower, please note that the product has moved, and the same app is now available as Thomas & Friends: Engine Activity Fun -- please download the new version here: https://itunes.apple.com/us/app/thomas-friends-engine-activity/id623385416?ls=1&mt=8.
For Version 3.0 or higher users ONLY:
As you continue to purchase packs, you will unlock cards for your match card collection. To see which cards you already have, go to the match game and tap the Thomas icon in the bottom right corner of the screen. From here, you can view and interact with your cards, or purchase more for your collection!
|
|
Consult with your Read With Me instruction manual. You will need to program your Read With Me controller using method 2 - using manufacture codes, or method 3 - manual search.
|
|
Call the number on the back of the instructions that came with your Barbie Girl™ device.
|
If your DVD player is not responding to your Read With Me™ controller please try the following:
- Make sure you have setup Read With Me™ controller correctly. The quick setup sheet can be found at www.service.fisher-price.com and the latest list of codes can be found at www.service.fisher-price.com
- Try moving your Read With Me™ controller closer to the TV.
- Replace the batteries on your Read With Me™ controller.
- Make sure your Read With Me™ controller is pointed directly at your DVD player.
- Always be sure your hand and the activity card are not covering the red window on the front of the Read With Me™ controller when pressing a button to respond to an activity.
- Make sure there are no large objects between your Read With Me™ controller and your DVD player. Large objects can block the signal between your controller and DVD player.
- Double check that the 3-position memory switch on the underside of your Read With Me™ controller is in the proper position. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|
IMPORTANT, PLEASE READ THIS SECTION FIRST:
The instructions below are only intended for users of Version 3.0 or higher. If you have are using Version 2.0 or lower, please note that the product has moved, and the same app is now available as Thomas & Friends: Engine Activity Fun -- please download the new version here: https://itunes.apple.com/us/app/thomas-friends-engine-activity/id623385416?ls=1&mt=8.
For Version 3.0 or higher users ONLY:
If you have purchased a new device or restored the software on an older device, you may need to restore your Thomas & Friends Engine Activities packs. Here are instructions to help you:
- 1. Launch Device
- 2. Tap on Settings
- 3. Scroll to Apps Section
- 4. Click on Activities (with the Thomas Icon)
- 5. Slide the option for Restore Previous Purchases On The Next Launch to On
- 6. Restart your device
- 7. Launch Engine Activities
|
Click here for instructions on how to clear app data on your tablet.
|
