No. Mattel meets or exceeds all safety guidelines developed and enforced by the Consumer Product Safety Commission, a government regulatory agency. For additional information on safety and sustainability, consumers can go to our website http://citizenship.mattel.com and then click on Safe and Sustainable Products.
|
The Barbie™ Star Light Adventure RC Hoverboard is meant for indoor use. The toy may not work properly when used outdoors and will be affected by wind and/or heat.
|
The battery pack is located on the doll’s back. Remove the skirt and vest, bend the doll’s arms gently if needed. Unscrew the battery cover at the back with a Philips head screwdriver and replace. Be sure to dispose of batteries properly.
|
The Barbie™ Star Light Adventure RC Hoverboard will fly about 5 meters or 17 feet from the surface it launches from.
|
Four AAA batteries are required, but are not included.
|
|
Connect the controller to a powered USB port with the supplied USB cable. Attach the power cable located inside the controller to Barbie™ Star Light Adventure RC Hoverboard. Set the toy to OFF position and controller in “charging” position (left). Charging light should be in red and turns green when it is fully charged.
|
|
The Star Light Adventure Galaxy Barbie® Doll & Hover Cat will fly freely. The maximum distance it will fly is 18.5 inches from the doll. The flying pattern can be affected by elements such as wind or heat.
|
Limited edition dolls are produced in quantities of 35,000 or less and Collectible dolls are produced in quantities greater than 35,000. Exact production numbers are never released to the public.
|
If Barbie™ Star Light Adventure RC Hoverboard keeps moving after launching, use the Trim buttons, located around the joystick to adjust. Press Trim button in opposite direction where Barbie™ Star Light Adventure RC Hoverboard moves until it remains still in the air. Press once and wait a few seconds until it is stabilized.
|
Fully charged, the Barbie™ Star Light Adventure RC Hoverboard will fly for about 7 minutes.
|
Yes; maximum of 6 at the same time.
|
Fall 2016.
|
If the fireplace wall is not pushed in far enough the TV will work but the fireplace will not. If it is pushed too far into the wall the TV will not pop-up.
|
If you notice a crack in the propellers, do not operate toy. Dispose broken parts properly and contact Mattel Consumer Services for a replacement.
|
Tips for achieving the best curls are as follows:
1. Use small sections of hair (the width of a girl’s pinky) to get the best results
2. Apply tension as your wrap the curl – the tighter the hair is wrapped, the better the curl
3. Hold for at least 10-15 seconds – the longer you hold, the better the curl
|
The joystick directions match the direction that Barbie is facing, rather than the direction that the operator is facing. If Barbie is facing away from you and you move the joystick forward, Barbie will fly away from you. If she is facing towards you and you move the joystick forward, she will move towards you.
|
|
Fully charged, the Star Light Adventure Galaxy Barbie® Doll & Flying Cat will fly for about 20 minutes.
|
To fully charge, the hoverboard should be to be plugged in for about 90 to 120 minutes. To charge, please reference instruction sheets or demo video on YouTube.
|
No. Please reach out to Mattel Consumer Services for replacement propellers.
|
Try replacing batteries and make sure there are no cracks in the propellers. If there is a crack in the propeller, do not operate toy. If your cat is still not flying, please contact Mattel Consumer Services.
|
No. Barbie is attached to the hoverboard.
|
To activate your Barbie® RC Train and Ride™ Horse, Press and hold the button on its forehead until the horse takes a step. Press the button again to make the horse walk. If the horse is not played with for a few minutes, it will go into a sleep mode. Simply press and hold the button on the horse’s forehead until it takes a step to wake it up.
|
Please twist and turn the hair extension plug as you are inserting it into the hole that is located in the head of the Barbie® Hairtastic™ Cut & Style™ Barbie® Doll.
|
Retailers nationwide, subject to availability.
|
2.4 GHz.
|
The hot tub lights are no longer manufactured with the intent on actually lighting up.
|
-
Fold the wings in half. The purple wings with details (with lines) should face the front. (Clicking noise will be heard to indicate that the wings are properly folded).
-
When placing wings on doll, turn the doll so that the back of the doll is facing you. Snap the bigger clasp with flower pattern on the top while the smaller clasp snaps to the bottom. (Clicking noise will indicate it is snapped on correctly).
-
If done correctly, the top clasp will be right next to the flower borders (see Back Wings Image).
-
If wings are snapped on correctly and the wings do not open, then move arms slightly forward (see “Slightly forward Arm” pictures).
|
Propellers can be re-attached by following the instructions provided in the box. Be sure to match the color of the propellers to the axles and that the silver is on the top. Press the propeller gently into the clips of the axles.
|
No. Mattel meets or exceeds all safety guidelines developed and enforced by the Consumer Product Safety Commission, a government regulatory agency. For additional information on safety and sustainability, consumers can go to our website http://citizenship.mattel.com and then click on Safe and Sustainable Products.
Be sure to fly the cat in an open area and not too close to other people. Also, do not put your fingers or any other objects in the propellers.
|
Match the color of propellers to the motor container. Keep the propellers perpendicular to the motor pins. Gently press propellers in until they stop.
|
No. If you notice a crack in the propellers, please contact Mattel Consumer Services for a replacement.
|
You will need a powered USB port from a computer, laptop or USB charger.
|
If the fireplace wall is not pushed in far enough the TV will work but the fireplace will not. If it is pushed too far into the wall the TV will not pop up.
|
Before playing with the Star Light Adventure Galaxy Barbie® Doll & Flying Cat, be sure to keep hair pulled back and out of your face to avoid it getting caught in propellers.
If you hair gets caught in the propellers, release the button immediately to turn the toy off. Take the propeller off to see if the hair can be slipped off the rotor or unwound more easily.
|
The remote should last for hours of play if it is turned off properly after play each time.
|
|
Turn off both devices and repeat pairing steps. Reference the instruction sheets provided in the package.
|
Turn on hoverboard and place it on a flat surface, and then controller to the ON position. Wait for the beep. Once the green light is on, the controller will stop flashing and the devices are paired.
|
Our server has been receiving a high volume of traffic due to the holiday, which caused some users to experience
service issues. Our engineers managed to identify and resolve many of these issues, but intermittent problems may
still exist as we continue to increase capacity.
If you're still experiencing issues, we recommend that you power cycle the Barbie Hello Dreamhouse by turning the
Dreamhouse off for 15 seconds and then powering it back on.
We are very sorry for the inconvenience this has caused you and your family, and appreciate your patience as we
get this resolved.
|