Checking for Updates
- Hello Barbie™ will check for updated when connected to the charging station and plugged in, and also connected to WiFi.
- Please connect Hello Barbie™ and wait a few minutes to make sure any updated are applied.
- You won't need to do anything else nor will you see anything different happen. When Hello Barbie™ starts talking, any update has been successfully applied.
|
If Bigfoot stops working, check the following
- Motor Stall – Was there any audible beeps from Bigfoot before he shut down: If audible beeps came from Bigfoot, a motor has stalled.
- 1-Beep = arm motors stall
- 2-Beeps = leg motor stall
- 3-Beeps = head motor stall
To Fix the Motor stall:
- Remove any obstruction from Bigfoot’s path.
- Turn the product off and then back on to restart the product.
- If this stall condition continues to happen when no obstruction is present, there is a malfunction with Bigfoot. Please contact Consumer Relations.
- Low Battery - Did Bigfoot say ‘Low battery’ before he stopped.
- If the battery is low, Bigfoot will say ‘low battery’, and the battery pack needs to be charged.
|
Because many consumers were opening the wrong compartment while attempting to change the batteries, all of the screws - except for the battery door screw - have been changed to tamper-proof screws with triangular heads. This makes replacing the couplers impossible. This change took effect March 15, 2010.
|
The new iPad Air and iPad Mini Retina are not compatible with the Barbie Digital Makeover app.
There is a known issue with iPad Air and iPad Mini Retina devices that is preventing the Barbie Digital Makeover App from functioning properly. We are aware of this issue and we are doing our best to resolve the situation and we will update the app as soon as a fix is available. We do not have a timeframe as to when it will be updated.
The product is compatible with iPad 2, iPad (3rd Generation), iPad (4th Generation) and iPad mini.
iPad is a trademark of Apple Inc., registered in the U.S. and other countries.
|
Treasure Hunt cars are Hot Wheels basic cars, produced in smaller quantities than our other basic cars, that incorporate special decorations and/or special wheels. Treasure Hunt cars are randomly packed out in our basic car assortments, so when you find one in a store you've found a real treasure!
|
Turn on hoverboard and place it on a flat surface, and then controller to the ON position. Wait for the beep. Once the green light is on, the controller will stop flashing and the devices are paired.
|
· Touch the screen with your finger to move forward to the next page.
· If the game keeps freezing, try doing a hard reset. Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear. Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button. Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
· The game also goes into a pause state if your fingers or the figure and base are removed from the screen. Place fingers or figure back down where suggested by the base outline to continue play.
|
Fisher-Price takes great pride in the Wooden Railway line of products and accessories that we produce and quality is very important to us. We thought it would be helpful to let you know that we include a small amount of plastic on some of our wooden products to further ensure their improved strength.
|
If the game keeps freezing, try doing a hard reset. Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear. Touch the thumbnail of the game until it wiggles, and then touch the minus button. Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
|
No. 3M Command™ strips are intended for mostly smooth surfaces. However, they will stick to painted, smooth cinder block (the type found inside many school buildings).
|
There are five games in the Dino Compound. Click the button for the game you want to play on the Compound Console at the bottom of the screen. You can earn health boost by playing any of the games - use these to heal while battling the Megavores™. Health boosts belong to the clan that won them - hybrids can only use them in battles that were won by hybrids within the same base clan.
|
|
Try to increase or decrease ambient lighting. Scanning may function better in different light, depending on the device used. Position the device at mid-range from the sticker, wait for the camera to focus, then slowly back away and/or move closer to optimize the zoom. Make sure your camera lens is clean.
|
The program will automatically check for updates each time you start the game. You can also manually check for updates using the "check for Updates" button in the main settings area. Click on the gear shaped icon. Click on the wrench icon.
|
|
Please note that this product needs two sets of batteries, and there are two separate battery boxes. One battery box operates the swing feature and needs 4 “C” batteries. The other battery box operates the vibration feature and requires 1 “D” battery.
If you've already changed the batteries and the swing is still not working, please contact one of our Fisher-Price® baby gear representatives by email or phone at 1-800-432-5437.
|
Extreme heat conditions and sunlight may cause the adhesive to eventually deteriorate, causing product failure. The adhesive could soften and lose adhesion above 105°F (40°C).
|
If you receive an error message during printing, turn off the Monster Maker using the power switch. Wait a few seconds and turn it back on. Restart the app.
|
Within career mode matches, when either your energy or your opponent’s energy level is low, the game will engage “power play” mode. Within that mode, you can use a special digital object that comes with your Superstar.
This is also where you can use the physical objects that come with the Apptivity WWE Rumblers Starter Set.
|
You only need to setup your Read With Me™ controller one time per DVD player. Your Read With Me™ controller can setup to be played with up to 3 different DVD players. There is a 3-position memory switch on the underside of your Read With Me™ controller. Each position of the switch can be programmed to a different DVD player. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|