-
First, ensure that the car is specifically meant for the Apptivity Hot Wheels game, and not a regular Hot Wheels car. You will be able to tell whether it is for Apptivity by looking for the contact points on the bottom of the car.
-
Ensure that the contact points are extended rather than retracted. There is a button on the bottom of the car that allows you to switch between traditional Hot Wheels car play (retracted) and Apptivity mode (extended).
-
Check the bottom of the car for debris, and wipe it with a clean, dry cloth.
-
Wipe your screen with a soft, dry cloth to ensure the best conductivity with the car.
-
Make sure you are holding the car in the right location in order for it to be recognized.
-
Hold it in the center and on the sides of the car while the tires are on the screen.
-
Make sure that you are not placing the car on the black or white frame around the iPad screen. You must keep the car only within the screen area.
-
Do not wear gloves or mittens since the car needs to come in contact with your fingertips.
|
The various colored icons are meant to direct you to the different hangars in the Hot Wheels Test Facility. The red diamond icon takes you to the Search and Destroy Hangar, the yellow triangle icon takes you to the Long Jump Hangar, and the blue circle icon takes you to the Race Hangar. The green tool icon will allow you to upgrade your vehicle in the workshop.
|
You need the appropriate piece of equipment, such as a flotation device, big-wheel tires or wings, to access certain areas. You can get this equipment in the Workshop, which you can find by following the green tool icon, then pressing the action button once you arrive at the Workshop hangar.
|
Click on the map icon in top left corner of screen. You can click on any of the icons to be taken to that particular area of the Test Facility.
|
The tutorial only plays once, but parts of it can be viewed again by clicking on the map icon on the top left corner of your screen.
|
Always remove the marker from the Monster Maker when printing is complete. Replace cap on marker immediately after use. Store the markers in the tool stand, cap side down, when not in use. If left uncapped, markers will dry out. Markers can be partially restored by replacing the caps and storing them in the tool stand, cap side down, for 24 hours. Use the included markers only with the Monster Maker.
|
-
You can customize your vehicle in the workshop. Follow the green tool icon to find the workshop hangar.
-
There are multiple types of customizations that you can make:
-
One-shots are one-time game modifiers that you can use to improve your performance, such as nitro bursts that give you faster speed. However, after you use a one-shot, you no longer have it anymore. You would need to unlock another one to use it again.
-
Add-ons are customizations that can be used forever on your vehicle, such as tires or weapons. Once you have unlocked them, they are permanently available for your use.
-
In order to modify your vehicle in the workshop, tap any icon in the circle with your finger and it will take you to the page where you can unlock it, if you have enough credits.
-
You can purchase more credits to unlock specific one-shot or add-on modifications. Once add-ons are purchased, they will always be available to equip your car.
|
The more you play the game, the more credits you earn. You can redeem credits in the workshop. Your credits are listed in the top right corner of the screen.
|
-
Touch the screen with your finger to move forward to the next page.
-
If the game keeps freezing, try doing a hard reset.
-
Click the home button on your iPad to get to the home screen.
-
Then double-click the home button again. The multitasking bar will appear.
-
Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button.
-
Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
|
-
PC: Windows Vista, Windows 7, Windows 8, Windows 8.1, Intel® Core™ i3 Processor, 2 GB RAM
|
You should place the Apptivity Hot Wheels car on the screen in that location in order to play.
|
|
There is a silver-colored speed control button on the lower left side of the screen. The image on it is a gear box. Tap the button to move from “Stop” mode to “Slow” and “Fast” modes.
|
-
From your iPad home screen, go to Settings, General, then Multitasking Gestures. Turn off Multitasking Gestures.
-
Make sure that you do not press the car down on the iPad home button, as that will close the game.
|
The action button is the button on the hood of the car that you can press down in order to start the game, activate weapons, enter buildings and other zones, and more.
|
-
Monster Maker is made for iPad Air, iPad mini with Retina display, iPad (4th generation), iPad mini, and iPad (3rd generation). iOS 7.0 or higher is required.
-
Monster Maker is compatible with Samsung Galaxy Tab®, Samsung Galaxy Tab® 2, Samsung Galaxy Tab® 3, Samsung Galaxy Tab®, 8.9, Samsung Galaxy Tab® 10.1, Samsung Galaxy Note®, Google Nexus 7 (2012), Google Nexus 7 (2013), Google Nexus 10, Sony Xperia™ Tablet Z, Toshiba Excite™.
|
You should pull the car back so that your car stays in that location on the screen.
|
It works best without a screen protector.
|
|
|
In career mode or exhibition mode, look for black track-pad with chevron arrows at bottom or side of the screen. Move your figure back and forth along the track-pad rapidly to grapple, pin, or toss a Superstar out of the ring.
In the specialty matches, move your figure back-and forth along the track-pad rapidly to catch up to the opposing Superstar, or to increase your power against him.
|
From the home screen, tap the Settings icon. From there you can change a variety of settings including turning off multitasking gestures. For more detail, please refer to http://www.apple.com/support/ipad
|
IMPORTANT, PLEASE READ THIS SECTION FIRST: The instructions below are only intended for users of Version 3.0 or higher. If you have are using Version 2.0 or lower, please note that the product has moved, and the same app is now available as Thomas & Friends: Engine Activity Fun -- please download the new version here: https://itunes.apple.com/us/app/thomas-friends-engine-activity/id623385416?ls=1&mt=8.
For Version 3.0 or higher users ONLY: As you continue to purchase packs, you will unlock cards for your match card collection. To see which cards you already have, go to the match game and tap the Thomas icon in the bottom right corner of the screen. From here, you can view and interact with your cards, or purchase more for your collection!
|
To initially configure Hello Barbie™, please follow the steps below:
- Download the Companion App for your device from: https://toytalk.com/product/hello-barbie/
- Ensure your Hello Barbie™ doll is plugged in and is charging. For best results, we recommend that Hello Barbie™ be as close to your Internet router as possible.
- Open the Companion App and follow the outlined step to create your Toy Talk account
- Follow the in-app steps to configure your WiFi network
|
IMPORTANT, PLEASE READ THIS SECTION FIRST: The instructions below are only intended for users of Version 3.0 or higher. If you have are using Version 2.0 or lower, please note that the product has moved, and the same app is now available as Thomas & Friends: Engine Activity Fun -- please download the new version here: https://itunes.apple.com/us/app/thomas-friends-engine-activity/id623385416?ls=1&mt=8.
For Version 3.0 or higher users ONLY: Because Engine Activities is universal, you should be able to run all purchased packs on iPad and iPhone, without needing to buy them again. To access an already purchased pack on a different device, simply tap the “Buy” icon on the second device. The app will recognize that you already own those activities, and you will be prompted to begin the download free of charge.
|
IMPORTANT, PLEASE READ THIS SECTION FIRST: The instructions below are only intended for users of Version 3.0 or higher. If you have are using Version 2.0 or lower, please note that the product has moved, and the same app is now available as Thomas & Friends: Engine Activity Fun -- please download the new version here: https://itunes.apple.com/us/app/thomas-friends-engine-activity/id623385416?ls=1&mt=8.
For Version 3.0 or higher users ONLY: If you have purchased a new device or restored the software on an older device, you may need to restore your Thomas & Friends Engine Activities packs. Here are instructions to help you:
- 1. Launch Device
- 2. Tap on Settings
- 3. Scroll to Apps Section
- 4. Click on Activities (with the Thomas Icon)
- 5. Slide the option for Restore Previous Purchases On The Next Launch to On
- 6. Restart your device
- 7. Launch Engine Activities
|
When playing the game, lift your figure or fingers off the screen for at least 4 seconds, and the pause menu will appear.
The map icon is the MH pendant at the top of the left side of the screen. Tap it to access the map.
The map has arrows pointing to where you should go next to complete your task. The various colored icon shows you where you currently are.
o Blue = Frankie
o Pink = Draculaura
o Purple = Clawdeen
o Turquoise = Lagoona
Skullette™ icons show you where non-player characters are located.
|
Apptivity is currently only compatible with iPad, iPad 2 and the new iPad. Some Fisher-Price Apptivity items are compatible with iPhone or iPod Touch. Be sure to check toy packaging to see which devices are compatible for your specific toy.
|
First, ensure that the figure is specifically meant for the Apptivity WWE Rumblers game, and is not a regular Rumblers figure. You will be able to tell whether it is for Apptivity by looking for the base that the figure sits on. Only the figures with a base will work with the game.
Check the bottom of the base for debris, and wipe it with a clean, dry cloth.
Wipe your screen with a soft, dry cloth to ensure the best conductivity with the base.
Make sure you are holding the figure by the grips on its base in order for it to be recognized. Do not wear gloves or mittens since the grips need to come in contact with your fingertips.
Make sure that you are not placing the figure on the frame around the iPad screen. You must keep the figure only within the active screen area.
|
When playing the game, lift your figure or fingers off the screen for at least 4 seconds, and the pause menu will appear.
The checklist icon is the green notepaper at the left side of the screen. Tap it to access the checklist.
The checklist will indicate your next task or assignment within the game.
|
In Career mode, you battle your way through the ranks to earn your spot to compete for the Championship Belt.
|
If this occurs during the Hello Barbie™ setup process, make sure the doll is properly charged. Hello Barbie™ should remain in the charging station and connected to power during the setup.
When putting Hello Barbie™ into connection mode, make sure you see white flashing lights (they may also look light blue) If the lights flash (royal) blue, Hello Barbie™ has been reset and will automatically say "My batteries need to recharge. Please connect me to the charging station." Connect Hello Barbie™ to the charger and continue putting her into connection mode.
If this occurs during conversations or red lights appear, connect Hello Barbie™ to her charger, make sure that the charging cable is firmly connected to the doll, and that the orange charging indicator is illuminated.
|
Touch the screen with your finger to move forward to the next page.
If the game keeps freezing, try doing a hard reset. Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear. Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button. Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
The game goes into a pause state if your fingers or the figure and base are removed from the screen. Place fingers or figure back on screen where suggested by the base outline to continue play.
|
When playing the game, lift your figure or fingers off the screen for at least 4 seconds, and the pause menu will appear.
Tap the purple lips to turn off either all sound or the music only.
Alternatively, you can turn off all sound on your iPad using the hardware switch on the side of your device.
|
· Check the bottom of the figure for debris, and wipe it with a clean, dry cloth.
· Wipe your screen with a soft, dry cloth to ensure the best conductivity with the figure.
· Do not wear gloves or mittens since the figure needs to come in contact with your fingertips.
· Make sure that you are not placing the figure on the frame around the iPad screen. You must keep the figure only within the active screen area.
· The figure is only recognized when placed within an open level, so make sure you don’t put it down on a menu page or another non-playable screen.
|
Each character has her own unique adventure taking place in the world of Monster High. Gameplay includes collecting objects, and playing mini-games to advance the story:
o Draculaura™ wins a group of spirited creatures at the Monster High carnival, and they run wild, terrorizing the school. To spare Clawd from eternal detention, Draculaura searches for a way to get them under control and discovers their true freaky-fab nature in the process.
o When a science experiment goes awry in Mr. Hack’s class, Frankie has a high voltage energy interaction with Otto Maton. She is sparking at the bolts to stitch things up after this revoltage exchange of energy and ultimately finds a chic solution.
o Due to a Cupid mishap, Clawdeen accidentally becomes the furrocious object of Manny Taur’s affections. His bullying style of courtship leaves Clawdeen picking up the pieces of the messes he makes. To reclaim her boy-free independence, Clawdeen must reverse Cupid's spell.
o Lagoona thinks something is fishy when Gil tries to avoid her. She soon learns that he has the Blue Flu and is fleeing in the other direction to keep her from getting sick. Determined to help, she finds a way to stand by her man (errr…fish).
|
When playing the game, lift your figure or fingers off the screen for at least 4 seconds, and the pause menu will appear.
Tap the pink heart icon to go back to the main menu where you can access another character’s game.
|
You can, but you will only be able to play the initial portion of each character’s game unless you have Apptivity toy for that character.
To play without the toy, use two fingers to move around the screen, and a third finger to press the action button.
|
Touch the screen with your finger or push the action button to move forward.
If the game keeps freezing, try doing a hard reset. Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear. Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button. Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
|
· Yes, you can earn credits that can be redeemed for additional weapons, combat gear and weapons upgrades.
· Note that you can only have unlimited ammo for the specific weapon associated with your physical Apptivity Batman figure.
|
Once you complete the game for one character, you can access the mini-games within that game again through the main menu.
|
Each Superstar has his own signature move, offense/defense ranks, signature Superstar entrance, and digital object to use in-game during power play mode (objects are only available in career mode).
After each match, win or lose, you earn experience points which can be applied to upgrade your Superstar’s offense or defense capabilities.
|
Hello Barbie™ may occasionally encounter issues sending and receiving conversations. The issues may be based on signal strength, roaming, or Internet congestion. Usually the issues are brief and Hello Barbie™ will resume operation quickly. This can also occur when Hello Barbie™ has been in connection mode for along time or has timed out after a long period of inactivity. Turning Hello Barbie™ off and on again will enable the doll to resume normal activity.
This may also happen if Hello Barbie™ loses its WiFi connection. Please take the following steps:
- Close the Companion App
- Go to your devise's WiFi settings
- Reconnect to your WiFi network
In addition, you may get this message if Hello Barbie's batteries are low. If this is the case, please place Hello Barbie™ back on her charger.
|
Checking for Updates
- Hello Barbie™ will check for updated when connected to the charging station and plugged in, and also connected to WiFi.
- Please connect Hello Barbie™ and wait a few minutes to make sure any updated are applied.
- You won't need to do anything else nor will you see anything different happen. When Hello Barbie™ starts talking, any update has been successfully applied.
|
For best results, make sure doll parts are clean and dry before installing in Monster Maker. If your design did not print completely, erase ink using the provided sponge. Add water and a little dish soap (not included) and rub with the sponge until the ink is removed. Dry the doll part thoroughly before putting it back in the Monster Maker.
|
The new iPad Air and iPad Mini Retina are not compatible with the Barbie Digital Makeover app.
There is a known issue with iPad Air and iPad Mini Retina devices that is preventing the Barbie Digital Makeover App from functioning properly. We are aware of this issue and we are doing our best to resolve the situation and we will update the app as soon as a fix is available. We do not have a timeframe as to when it will be updated.
The product is compatible with iPad 2, iPad (3rd Generation), iPad (4th Generation) and iPad mini.
iPad is a trademark of Apple Inc., registered in the U.S. and other countries.
|
· Touch the screen with your finger to move forward to the next page.
· If the game keeps freezing, try doing a hard reset. Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear. Touch the thumbnail of the Apptivity game until it wiggles, and then touch the minus button. Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
· The game also goes into a pause state if your fingers or the figure and base are removed from the screen. Place fingers or figure back down where suggested by the base outline to continue play.
|
If the game keeps freezing, try doing a hard reset. Click the home button on your iPad to get to the home screen. Then double-click the home button again. The multitasking bar will appear. Touch the thumbnail of the game until it wiggles, and then touch the minus button. Then click the home button again, and restart the game by clicking the thumbnail for the game on your home screen.
|
Check the bottom of the base for debris, and wipe it with a clean, dry cloth.
Wipe your screen with a soft, dry cloth to ensure the best conductivity with the figure.
Make sure you are holding the figure in the right location in order for it to be recognized. Hold it on the sides of the base where the black indented finger grips are. Do not wear gloves or mittens since the base needs to come in contact with your fingertips.
Make sure that you are not placing the figure on the black or white frame around the iPad screen. You must keep the figure only within the screen area.
|
You automatically earn one virtual object with each figure you use. In power play mode, you can look at the drop down menu where as you win against each opponent, you also earn their object.
Put the object down on the “+” icon to unlock it. Once you have unlocked it, you can access it during future Power Play modes.
Items in blue are available to use. Items in grey are objects that you have not earned/unlocked with the specific Apptivity WWE Rumblers figure you are using. Objects in orange are those that you have selected to use.
|
If you receive an error message during printing, turn off the Monster Maker using the power switch. Wait a few seconds and turn it back on. Restart the app.
|
Within career mode matches, when either your energy or your opponent’s energy level is low, the game will engage “power play” mode. Within that mode, you can use a special digital object that comes with your Superstar.
This is also where you can use the physical objects that come with the Apptivity WWE Rumblers Starter Set.
|