No. If you notice a crack in the propellers, please contact Mattel Consumer Services for a replacement.
|
Try replacing batteries and make sure there are no cracks in the propellers. If there is a crack in the propeller, do not operate toy. If your cat is still not flying, please contact Mattel Consumer Services.
|
|
The battery pack is located on the doll’s back. Remove the skirt and vest, bend the doll’s arms gently if needed. Unscrew the battery cover at the back with a Philips head screwdriver and replace. Be sure to dispose of batteries properly.
|
To activate your Barbie® RC Train and Ride™ Horse, Press and hold the button on its forehead until the horse takes a step. Press the button again to make the horse walk. If the horse is not played with for a few minutes, it will go into a sleep mode. Simply press and hold the button on the horse’s forehead until it takes a step to wake it up.
|
You will need a powered USB port from a computer, laptop or USB charger.
|
Turn off both devices and repeat pairing steps. Reference the instruction sheets provided in the package.
|
Four AAA batteries are required, but are not included.
|
|
You may have an older computer that doesn’t support USB 2.0. Barbie Girl™ will still work fine with your computer.
|
The hot tub lights are no longer manufactured with the intent on actually lighting up.
|
Check the file type. Barbie Doll'd Up Nails app does not support TIFF files.
|
The new iPad Air and iPad Mini Retina are not compatible with the Barbie Digital Makeover app.
There is a known issue with iPad Air and iPad Mini Retina devices that is preventing the Barbie Digital Makeover App from functioning properly. We are aware of this issue and we are doing our best to resolve the situation and we will update the app as soon as a fix is available. We do not have a timeframe as to when it will be updated.
The product is compatible with iPad 2, iPad (3rd Generation), iPad (4th Generation) and iPad mini.
iPad is a trademark of Apple Inc., registered in the U.S. and other countries.
|
2.4 GHz.
|
The remote should last for hours of play if it is turned off properly after play each time.
|
The Star Light Adventure Galaxy Barbie® Doll & Hover Cat will fly freely. The maximum distance it will fly is 18.5 inches from the doll. The flying pattern can be affected by elements such as wind or heat.
|
The Barbie™ Star Light Adventure RC Hoverboard is meant for indoor use. The toy may not work properly when used outdoors and will be affected by wind and/or heat.
|
|
Please twist and turn the hair extension plug as you are inserting it into the hole that is located in the head of the Barbie® Hairtastic™ Cut & Style™ Barbie® Doll.
|
To fully charge, the hoverboard should be to be plugged in for about 90 to 120 minutes. To charge, please reference instruction sheets or demo video on YouTube.
|
Check all the connections to make sure they’re tight. Also make sure the Barbie Girl™ USB connector is popped all the way out of the device. If it is, plug it firmly into the docking station. Then be sure to plug the USB cable firmly into a USB port on your computer. If the device is still not recognized, plug the docking station into a different USB port. Remember…the Barbie Girl™ device software only works on a PC computer. Your Barbie Girl™ is not Mac compatible. Ask a grownup for help if you need it!
|
If the fireplace wall is not pushed in far enough the TV will work but the fireplace will not. If it is pushed too far into the wall the TV will not pop-up.
|
-
Fold the wings in half. The purple wings with details (with lines) should face the front. (Clicking noise will be heard to indicate that the wings are properly folded).
-
When placing wings on doll, turn the doll so that the back of the doll is facing you. Snap the bigger clasp with flower pattern on the top while the smaller clasp snaps to the bottom. (Clicking noise will indicate it is snapped on correctly).
-
If done correctly, the top clasp will be right next to the flower borders (see Back Wings Image).
-
If wings are snapped on correctly and the wings do not open, then move arms slightly forward (see “Slightly forward Arm” pictures).
|
Call the number on the back of the instructions that came with your Barbie Girl™ device.
|
Yes; maximum of 6 at the same time.
|
Match the color of propellers to the motor container. Keep the propellers perpendicular to the motor pins. Gently press propellers in until they stop.
|
Fall 2016.
|
Touch the item you want to swap, then drag your finger left or right to cycle through the options.
|
The Barbie™ Star Light Adventure RC Hoverboard will fly about 5 meters or 17 feet from the surface it launches from.
|
|
During the setup process your device is connected to your new Hello Barbie™. If the Hello Barbie™ Companion App is closed while Hello Barbie™ is still connected to your device, the "Connection Error" will appear. Please take the following steps:
- Close the Companion App
- Go to your device's WiFi settings
- Reconnect to your WiFi network, Re-open the Barbie Companion App
The error should be resolved and you can continue the setup process. In some cases, you may have to start over.
|
If you notice a crack in the propellers, do not operate toy. Dispose broken parts properly and contact Mattel Consumer Services for a replacement.
|
Tips for achieving the best curls are as follows:
1. Use small sections of hair (the width of a girl’s pinky) to get the best results
2. Apply tension as your wrap the curl – the tighter the hair is wrapped, the better the curl
3. Hold for at least 10-15 seconds – the longer you hold, the better the curl
|
|
The joystick directions match the direction that Barbie is facing, rather than the direction that the operator is facing. If Barbie is facing away from you and you move the joystick forward, Barbie will fly away from you. If she is facing towards you and you move the joystick forward, she will move towards you.
|
Turn on hoverboard and place it on a flat surface, and then controller to the ON position. Wait for the beep. Once the green light is on, the controller will stop flashing and the devices are paired.
|
|
|
If the fireplace wall is not pushed in far enough the TV will work but the fireplace will not. If it is pushed too far into the wall the TV will not pop up.
|
No. Mattel meets or exceeds all safety guidelines developed and enforced by the Consumer Product Safety Commission, a government regulatory agency. For additional information on safety and sustainability, consumers can go to our website http://citizenship.mattel.com and then click on Safe and Sustainable Products.
|
Click here for instructions on how to clear app data on your tablet.
|
Fully charged, the Barbie™ Star Light Adventure RC Hoverboard will fly for about 7 minutes.
|
Barbie Girl™ will still work as a digital music player. But if you want to access any of the special items on BarbieGirls.com or become Best Friends with another user, you will need to register your Barbie Girl™ using the Barbie Girl™ software.
|
Yes. However, the screenshots in the instructions will look different that what you will see on your computer. You can also drag and drop mp3 and WMA files directly to your device using Windows Explorer.
|
Use your Email app to create a message, then browse your Photo app to find the photo and attach it to the email.
|
Call the number on the back of the instructions that came with your Barbie Girl™. After your purchase has been verified you’ll be issued a new registration code.
|
Propellers can be re-attached by following the instructions provided in the box. Be sure to match the color of the propellers to the axles and that the silver is on the top. Press the propeller gently into the clips of the axles.
|
To initially configure Hello Barbie™, please follow the steps below:
- Download the Companion App for your device from: https://toytalk.com/product/hello-barbie/
- Ensure your Hello Barbie™ doll is plugged in and is charging. For best results, we recommend that Hello Barbie™ be as close to your Internet router as possible.
- Open the Companion App and follow the outlined step to create your Toy Talk account
- Follow the in-app steps to configure your WiFi network
|
If Barbie™ Star Light Adventure RC Hoverboard keeps moving after launching, use the Trim buttons, located around the joystick to adjust. Press Trim button in opposite direction where Barbie™ Star Light Adventure RC Hoverboard moves until it remains still in the air. Press once and wait a few seconds until it is stabilized.
|
|
|
No. Barbie is attached to the hoverboard.
|
|
No. Please reach out to Mattel Consumer Services for replacement propellers.
|
Click here to see the instructions on how to perform a hard factory reset on your tablet.
|
Retailers nationwide, subject to availability.
|
Limited edition dolls are produced in quantities of 35,000 or less and Collectible dolls are produced in quantities greater than 35,000. Exact production numbers are never released to the public.
|
Your photos are saved automatically to the Photo app on your device.
|
Before playing with the Star Light Adventure Galaxy Barbie® Doll & Flying Cat, be sure to keep hair pulled back and out of your face to avoid it getting caught in propellers.
If you hair gets caught in the propellers, release the button immediately to turn the toy off. Take the propeller off to see if the hair can be slipped off the rotor or unwound more easily.
|
Hello Barbie™ can store up to three WiFi networks. To add additional WiFi networks, please follow the steps below:
- Have the Hello Barbie™ Doll and the Companion App near one another
- Open the Hello Barbie™ Companion App on your device
- On the "Manage Hello Barbie™" screen, tap the "Manage WiFi Connection" button
- Follow the in-app steps to add additional WiFi Networks
|
Connect the controller to a powered USB port with the supplied USB cable. Attach the power cable located inside the controller to Barbie™ Star Light Adventure RC Hoverboard. Set the toy to OFF position and controller in “charging” position (left). Charging light should be in red and turns green when it is fully charged.
|
|
Checking for Updates
- Hello Barbie™ will check for updated when connected to the charging station and plugged in, and also connected to WiFi.
- Please connect Hello Barbie™ and wait a few minutes to make sure any updated are applied.
- You won't need to do anything else nor will you see anything different happen. When Hello Barbie™ starts talking, any update has been successfully applied.
|
Fully charged, the Star Light Adventure Galaxy Barbie® Doll & Flying Cat will fly for about 20 minutes.
|
Hello Barbie™ may occasionally encounter issues sending and receiving conversations. The issues may be based on signal strength, roaming, or Internet congestion. Usually the issues are brief and Hello Barbie™ will resume operation quickly. This can also occur when Hello Barbie™ has been in connection mode for along time or has timed out after a long period of inactivity. Turning Hello Barbie™ off and on again will enable the doll to resume normal activity.
This may also happen if Hello Barbie™ loses its WiFi connection. Please take the following steps:
- Close the Companion App
- Go to your devise's WiFi settings
- Reconnect to your WiFi network
In addition, you may get this message if Hello Barbie's batteries are low. If this is the case, please place Hello Barbie™ back on her charger.
|
No. Mattel meets or exceeds all safety guidelines developed and enforced by the Consumer Product Safety Commission, a government regulatory agency. For additional information on safety and sustainability, consumers can go to our website http://citizenship.mattel.com and then click on Safe and Sustainable Products.
Be sure to fly the cat in an open area and not too close to other people. Also, do not put your fingers or any other objects in the propellers.
|
If this occurs during the Hello Barbie™ setup process, the WiFi SSID name or the WiFi password was possibly entered incorrectly. Select the "Manage WiFi" option to add the correct SSID name and password.
If the issue occurs during conversations and/or Hello Barbie's lights are flashing yellow you may need to move the doll closer to the WiFi router/modem. Hello Barbie's lights will flash yellow if the WiFi signal is getting weaker.
|
If this occurs during the Hello Barbie™ setup process, make sure the doll is properly charged. Hello Barbie™ should remain in the charging station and connected to power during the setup.
When putting Hello Barbie™ into connection mode, make sure you see white flashing lights (they may also look light blue) If the lights flash (royal) blue, Hello Barbie™ has been reset and will automatically say "My batteries need to recharge. Please connect me to the charging station." Connect Hello Barbie™ to the charger and continue putting her into connection mode.
If this occurs during conversations or red lights appear, connect Hello Barbie™ to her charger, make sure that the charging cable is firmly connected to the doll, and that the orange charging indicator is illuminated.
|
While we don’t have historical information, pictures, or resale value information here, you can find a wealth of information online.
For Fisher-Price products, you might also want to check out the book, Fisher-Price: Historical, Rarity, and Value Guide, 1931-Present, Updated 3rd Edition.
For Hot Wheels, you can also log on to www.hotwheelscollectors.com. At the top, click on “Forums” to connect to other Hot Wheels collectors who might be able to help you out.
For Barbie, you can find a ton of articles and stories on our blog at www.barbie.com that will give you an inside look at our dolls. There, you can also connect with other collectors who might be able to help you out. If you click on “Signature” at the top, then “Get Involved,” it will take you to a page where you can find Collector Clubs in your area.
|
Our server has been receiving a high volume of traffic due to the holiday, which caused some users to experience
service issues. Our engineers managed to identify and resolve many of these issues, but intermittent problems may
still exist as we continue to increase capacity.
If you're still experiencing issues, we recommend that you power cycle the Barbie Hello Dreamhouse by turning the
Dreamhouse off for 15 seconds and then powering it back on.
We are very sorry for the inconvenience this has caused you and your family, and appreciate your patience as we
get this resolved.
|
The Camera/Printer busy error appears when there is a communication error between the printer and the computer. To correct this issue:
- Close the software
- Open Control Panel
- Open the Printers & Faxes
- Double-click the Mattel Barbie Doll’D Up Nails Printer
- Delete any nail prints that are in the queue
|
Call the number on the back of the instructions that came with your Barbie Girl™ and they will give you step-by-step instructions.
|
The battery is low. Plug your Barbie Girl™ into the docking station to recharge it! The LED lights up when your Barbie Girl™ is charging, and turns off when your device is fully charged.
|
Barbie Girl™ plays both mp3 and WMA music files. Files protected by digital rights management (DRM) are not supported.
|
In order to have Secret B Chat™ with friends, you must become best friends on BarbieGirls.com. In order to become best friends, you must connect your Barbie Girl™ to each other’s computers and both receive parental approval to use that feature on the site. In the meantime, you can still have a B Chat™!
|
Confirm your login information is correct and try again. If you forgot your password, click “forgot password?” to retrieve it. If you have a basic account and you forgot your username, you will need to re-register. If you have a Barbie Girl™ device and you forgot your username, call the number located on the back of the instructions that came with your Barbie Girl™. If your parent has set up a Parents’ Place account, you can also check out your account details or change your password with their help.
|