https://qservice.corp.mattel.com/us/Docs/
|
|
https://qservice.corp.mattel.com/us/Docs/>A. We recommend using alkaline batteries with our products, as they are great for long-term use and help optimize performance. We don't recommend using Carbon-Zinc batteries. While Carbon-Zinc batteries may work well with low-power devices, they can drain after a short period of time and cause certain products to not function properly.
|
We’re sorry, but we don't have a program that offers parents Fisher-Price® products, Mattel® products, or coupons. Our website has a ton of helpful hints and great information for parents, though!
|
We recommend using alkaline batteries with our products, as they are great for long-term use and help optimize performance. We don't recommend using Carbon-Zinc batteries. While Carbon-Zinc batteries may work well with low-power devices, they can drain after a short period of time and cause certain products to not function properly.
|
When entering your Special Code, make sure you are entering the hyphens between the 3 sets of 4 characters. If you are still having a problem, contact Customer Service at 1-888-892-6123.
|
In swing mode, you can use your Take-Along Swing until your child becomes active and can climb out of the swing. The maximum weight limit is 25 pounds.
In infant seat mode, you may use your Take-Along Seat until your child is able to sit up unassisted. In this case, 25 pounds is also the maximum weight limit.
|
To see our full line of bassinets and play yards, please visit fisher-price.com.
|
Please mix the powder for 45 – 90 seconds or until the powder is dissolved and begins to thicken to a pudding like consistency.
|
https://qservice.corp.mattel.com/us/Docs/
|
Our monitors should only be used with Fisher-Price wall adapters to ensure the safety of the monitor.
Adapters should only be replaced with an original Fisher-Price wall adapter. If you need to purchase an adapter, please visit our online store.
|
Consult with your Read With Me instruction manual. You will need to program your Read With Me controller using method 2 - using manufacture codes, or method 3 - manual search.
|
|
Hello Barbie™ may occasionally encounter issues sending and receiving conversations. The issues may be based on signal strength, roaming, or Internet congestion. Usually the issues are brief and Hello Barbie™ will resume operation quickly. This can also occur when Hello Barbie™ has been in connection mode for along time or has timed out after a long period of inactivity. Turning Hello Barbie™ off and on again will enable the doll to resume normal activity.
This may also happen if Hello Barbie™ loses its WiFi connection. Please take the following steps:
- Close the Companion App
- Go to your devise's WiFi settings
- Reconnect to your WiFi network
In addition, you may get this message if Hello Barbie's batteries are low. If this is the case, please place Hello Barbie™ back on her charger.
|
https://qservice.corp.mattel.com/us/Docs/>
|
https://qservice.corp.mattel.com/us/Docs/
|
https://qservice.corp.mattel.com/us/Docs/
|
Your current room design doesn’t include a bed, and you’ve put furni in that extra space. Before changing your room design to one that does include a bed, you need to move items out of the way. Your bed will always go in the same place.
|
No, unless you are playing with your fingers. Each figure can only be used in that specific character’s game.
|
|
Try each of the codes listed under "ALL MODELS" for your DVD player's manufacturer until you find one that can work properly for all shapes on the test screen and both the skip ahead and skip back on the Read With Me™ controller.
|
You may use your Booster Seat with a child who has enough upper body control to sit up unassisted; 45 pounds maximum.
Use the restraint system until your child is able to get in and out of the product unassisted (about 2 ½ years old).
|
The red easel is tightly packed into an indentation on the under side of the main play set on the Little People Preschool.
|
Click here for instructions on how to clear app data on your tablet.
|
https://qservice.corp.mattel.com/us/Docs/
|
To see our full line of bathtubs and potty chairs, please visit fisher-price.com.
|
https://qservice.corp.mattel.com/us/Docs/
|
You can use your bouncer from birth until your child is able to sit up unassisted. The maximum weight limit is 25 pounds.
|
You may use your Take-Along swing from birth until the child becomes active and can climb out of the swing; 25 pounds maximum.
|
A. We recommend using alkaline batteries with our products, as they are great for long-term use and help optimize performance. We don't recommend using Carbon-Zinc batteries. While Carbon-Zinc batteries may work well with low-power devices, they can drain after a short period of time and cause certain products to not function properly.
|
The CD is under the back cover of the package.
|
-
Fold the wings in half. The purple wings with details (with lines) should face the front. (Clicking noise will be heard to indicate that the wings are properly folded).
-
When placing wings on doll, turn the doll so that the back of the doll is facing you. Snap the bigger clasp with flower pattern on the top while the smaller clasp snaps to the bottom. (Clicking noise will indicate it is snapped on correctly).
-
If done correctly, the top clasp will be right next to the flower borders (see Back Wings Image).
-
If wings are snapped on correctly and the wings do not open, then move arms slightly forward (see “Slightly forward Arm” pictures).
|
https://qservice.corp.mattel.com/us/Docs/>A. We
|
https://qservice.corp.mattel.com/us/Docs/
|
Bigfoot’s battery should be charged for 4 hours. Charging Instructions:
- The LED light on the charger will remain red for 4 continuous hours after being plugged in.
- After 4 hours the LED will turn green.
Please Note: If the charger is unplugged after this time and plugged back in, the LED will turn red again for 4 hours even though the battery is fully charged. The LED is not an indicator as to whether the battery is fully charged.
|
A full listing of our high chairs and booster seats are available on Fisher-Price.com.
|
You need your parent’s permission to use Secret B Chat™ and Super B Chat™, but not regular B Chat™. You’ll be asked to enter your parent’s email address so we can send them a note telling them all about Super B Chat™ or Secret B Chat™ and asking if it’s okay. In that email, they’ll get instructions on how to activate whatever chat you requested.
|
We don’t recommend having your little one play with any old or vintage products. Safety standards have changed greatly through the years, and many of the regulations we now have (such as testing for lead paint or rattle gauges) were non-existent back then. In addition, the Consumer Product Safety Commission (CPSC) wasn’t formed until the 1970s.
|
- Please make sure you have fresh, ALKALINE batteries in your puppy.
- Try to re-position his arms by manually pushing them down and into place so he may clap again. This will not cause damage to the internal mechanisms.
- While holding his arms together, press the blue button on the top of puppy’s foot. Your puppy will now start to clap.
|
|
You may use your SpaceSaver High Chair in the upright position only by children capable of sitting up unassisted; 50 pounds maximum.
Use the restraint system until your child is able to get in and out of the product unassisted (about 2 ½ years old).
|
Look in your inventory, it might be there. If it's not, look around Puerto Verde and click on the people there--they can help you find what you need.
|
In swing mode, you may use your Swing to High Chair until the child becomes active and can climb out of the swing; 25 pounds maximum.
In high chair mode, you may use your Swing to High Chair in the upright position only by children capable of sitting up unassisted; 50 pounds maximum. Use the restraint system until your child is able to get in and out of the product unassisted (about 2 ½ years old).
|
The View-Master® Virtual Realty Starter Pack comes with 1 View-Master® VR Viewer, 1 View-Master® VR Preview Reel, and 1 Adapter for the iPhone® 5s, iPhone 5c, and iPhone 5.
|
Click here to see the instructions on how to perform a hard factory reset on your tablet.
|
Yes, all Fisher-Price products can be sent through an x-ray machine.
|
Each character has a special ability that allows them to do unique actions within their world. It is able to be activated when the base glows on screen and there is a humming sound effect; at that point you can press the action button on the base of the figure.
o Frankie’s special ability is to electrify objects.
o Draculaura’s is to hang from the ceiling.
o Lagoona’s is to clear murky water.
o Clawdeen’s is to follow a scent trail.
|
The Star Light Adventure Galaxy Barbie® Doll & Hover Cat will fly freely. The maximum distance it will fly is 18.5 inches from the doll. The flying pattern can be affected by elements such as wind or heat.
|
You can use your bouncer from birth until your child is able to sit up unassisted. 25 pounds is the maximum weight limit.
|
You may use your cradle swing from birth until the child becomes active and can climb out of the swing; 25 pounds maximum.
|
Please twist and turn the hair extension plug as you are inserting it into the hole that is located in the head of the Barbie® Hairtastic™ Cut & Style™ Barbie® Doll.
|
Try each of the codes listed under "ALL MODELS" for your DVD player's manufacturer until you find one that can work properly for all shapes on the test screen and both the skip ahead and skip back on the Read With Me™ controller.
|
Click here for instructions on how to perform a hard factory reset on your nabi 2S tablet (including nabi Collector's Edition: The Force Star Wars tablets).
|
|
The only buttons that activate the puppy are on the top of both of his feet.
Your puppy is behaving just as he should be.
|
You may use your High Chair in the upright position only with a child who has enough upper body control to sit up unassisted; 50 pounds maximum.
|
The battery is low. Plug your Barbie Girl™ into the docking station to recharge it! The LED lights up when your Barbie Girl™ is charging, and turns off when your device is fully charged.
|
IMPORTANT, PLEASE READ THIS SECTION FIRST: The instructions below are only intended for users of Version 3.0 or higher. If you have are using Version 2.0 or lower, please note that the product has moved, and the same app is now available as Thomas & Friends: Engine Activity Fun -- please download the new version here: https://itunes.apple.com/us/app/thomas-friends-engine-activity/id623385416?ls=1&mt=8.
For Version 3.0 or higher users ONLY: Because Engine Activities is universal, you should be able to run all purchased packs on iPad and iPhone, without needing to buy them again. To access an already purchased pack on a different device, simply tap the “Buy” icon on the second device. The app will recognize that you already own those activities, and you will be prompted to begin the download free of charge.
|
No. The setup of your controller is required only one time for each DVD player with which you are using your InteracTV controller. If you have correctly setup your controller with the software that was included with your InteracTV controller, the controller should work with the separately sold software titles.
InteracTV™ is a mark of Beep Telecommunications and computing, L.L.C. Used under license.
|
No. The setup of your controller is only required one time for each DVD player with which you are using your Read With Me™ controller. If you have correctly setup your controller with the software that was included with your Read With Me™ controller, the controller should work with the separately sold software titles.
|
Please restart the Smart Remote programming process, and retest the controller. If this method is unsuccessful, please check the latest DVD code list to find the proper code for your DVD player. The latest code listing can be found at www.service.fisher-price.com. Also, if you do not have your quick setup sheet, you can download it at www.service.fisher-price.com. Please try setting up your Read With Me™ again using this Smart Remote method and quick setup sheet.
Here are some tips that may help you during the quick setup: Make sure you are using fresh alkaline batteries inside your Read With Me™ controller.
-
If you have followed the instructions on the quick setup sheet and your Read With Me ™ controller is still not working with your DVD player, try the setup again from the beginning.
-
It is possible that one of the signals did not register when pressed on your DVD player’s remote.
-
When pressing the numbers on your DVD remote be sure to wait for the audio prompt to finish and the LED on the Read With Me™ controller turns on.
|
Thanks for your interest in partnering with Mattel — it’s definitely an exciting opportunity for both of us!
If you are located in the US or Canada, your network of preferred wholesalers can assist you with getting started. Please visit our website, www.mattelpartners.com, and click on “Join Us” to view the contact details for our current preferred wholesalers. If you have additional questions, that site also contains a link to email our Mattel/Fisher-Price Toymaster.
If you are located outside the US or Canada, please visit our international contact page to reach out to your local team.
|
If your DVD player is not responding to your Read With Me™ controller please try the following:
- Make sure you have setup Read With Me™ controller correctly. The quick setup sheet can be found at www.service.fisher-price.com and the latest list of codes can be found at www.service.fisher-price.com
- Try moving your Read With Me™ controller closer to the TV.
- Replace the batteries on your Read With Me™ controller.
- Make sure your Read With Me™ controller is pointed directly at your DVD player.
- Always be sure your hand and the activity card are not covering the red window on the front of the Read With Me™ controller when pressing a button to respond to an activity.
- Make sure there are no large objects between your Read With Me™ controller and your DVD player. Large objects can block the signal between your controller and DVD player.
- Double check that the 3-position memory switch on the underside of your Read With Me™ controller is in the proper position. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|
Product manuals can be found online, by clicking here.
1. Enter the product number or toy name, or search by using the key words below. Then click "Go."
2. Identify your product from the list of results.
3. Click on the product image and follow the link to download the manual.
All our baby gear has a product number listed in small print near where the Fisher-Price® or Mattel information is stamped. It can usually be found above the barcode on the packaging and instructions, on the fabric tag, or etched into the product itself.
Our product manuals are available in Adobe® Acrobat® format (PDF). If you don’t have the free viewing software, Adobe® Reader®, this link will take you to their website for assistance.
|
Board Dudes® Dry Erase Markers are formulated and tested to work best with Board Dudes® products. Board Dudes® Dry Erase Markers have not been tested on other manufacturer’s products, which are made with different materials. Regrettably, we cannot say for certain how they'll work on boards made by any other manufacturers. We also recommend using Board Cleaner Wipes to remove the ink from the board. Sometimes when marker ink has been on the board for a long while, it can be difficult to remove.
|
Yes, all Fisher-Price®
high chairs, booster seats, rockers, swings, activity centers, bassinets, play
yards, sleepers, and infant bath tubs are JPMA certified.
You can click here to visit the JPMA website
for more information.
|
The rear feet are designed to be loose on all bouncers in order to improve your product’s performance. Please rest assured that your product is safe to use.
|
Ambush
- Passive
- An automatic first strike using the hybrid's strongest attack.
|
If this occurs during the Hello Barbie™ setup process, the WiFi SSID name or the WiFi password was possibly entered incorrectly. Select the "Manage WiFi" option to add the correct SSID name and password.
If the issue occurs during conversations and/or Hello Barbie's lights are flashing yellow you may need to move the doll closer to the WiFi router/modem. Hello Barbie's lights will flash yellow if the WiFi signal is getting weaker.
|
Software needs to be updated. For software updates, register your product using the software code appearing on the back of the interactive booklet. Follow the instructions on-screen to check for updates. Make sure your video driver is up-to-date. (Check your computer or hardware manufacturer’s website for driver updates.) Confirm your computer meets minimum system requirements and your internet connection is OK.
|
Yes, one user would use the handheld(s) and the second user could use the software installed on the PC.
Once the software is installed, simply select “Create New User” from the file menu and fill out the form. If you do not have a registration code, you may leave this field blank. This creates a trial account which will be active for 90 days.
If you are using a trial account, you may create a new account near the end of the trial period. The new account name should be shared with your friends, so that they may add your new account to their friends list. The original account will lock after the 90 period and after 6 months the locked account will be deleted.
|
There is a quick and easy way to verify that your product is JPMA certified. Just click here, and select the type of product you have. If Fisher-Price® is listed, all of our products in that category are JPMA certified. For example, if you select “High Chair” in the drop-down menu, you’ll see our name. This indicates that our high chairs are JPMA certified.
All products that are JPMA certified have a certification seal right on them. This seal verifies that the product has undergone independent laboratory testing to make sure it meets state, federal, and applicable ASTM standards. Every manufacturer that participates in the JPMA Certification Program is held to the highest standards and must meet or exceed those standards on every product. For us, the JPMA seal symbolizes our commitment to safety and quality.
|
Each character has her own unique adventure taking place in the world of Monster High. Gameplay includes collecting objects, and playing mini-games to advance the story:
o Draculaura™ wins a group of spirited creatures at the Monster High carnival, and they run wild, terrorizing the school. To spare Clawd from eternal detention, Draculaura searches for a way to get them under control and discovers their true freaky-fab nature in the process.
o When a science experiment goes awry in Mr. Hack’s class, Frankie has a high voltage energy interaction with Otto Maton. She is sparking at the bolts to stitch things up after this revoltage exchange of energy and ultimately finds a chic solution.
o Due to a Cupid mishap, Clawdeen accidentally becomes the furrocious object of Manny Taur’s affections. His bullying style of courtship leaves Clawdeen picking up the pieces of the messes he makes. To reclaim her boy-free independence, Clawdeen must reverse Cupid's spell.
o Lagoona thinks something is fishy when Gil tries to avoid her. She soon learns that he has the Blue Flu and is fleeing in the other direction to keep her from getting sick. Determined to help, she finds a way to stand by her man (errr…fish).
|
To let us know about someone’s bad behavior, click her character’s baseball card and select “report.” Then, from the drop-down menu, select the reason why you’re reporting her to us. Remember, we take these reports super seriously! Please do not report someone as a joke or to make them feel bad.
|
When playing the game, lift your figure or fingers off the screen for at least 4 seconds, and the pause menu will appear.
Tap the pink heart icon to go back to the main menu where you can access another character’s game.
|
If you feel your swing is too fast, please try the following trouble-shooting techniques:
• Try a lower speed setting • If the low setting provides too much swinging motion for the child, try placing one end of a blanket underneath the child and let the other end of the blanket drape down while swinging. • If all of these techniques prove unsuccessful, please contact one of our Fisher-Price® Baby Gear representatives.
Remember, the lighter the child is in the swing, the higher the swing can swing and the faster it will seem.
|
Follow the steps below:
• Confirm the Batmobile vehicle’s battery is charged and the power is
turned “ON”
• Confirm the Batmobile RC Controller App is installed, and open the
app.
• Once the app is open, Select “Novice Pilot” and follow the following
on screen instructions.
• Tap the “Default Password” button to copy
• Tap on “WiFi Settings” to access your mobile device’s Settings
Menu
• Once in your device’s Settings Menu, navigate to “WiFi Settings”
• Once in “WiFi Settings”, confirm your WiFi is turned “ON”
• Select the “Batmobile” WiFi network. It will be labeled
with four alphanumeric characters followed by “-Batmobile”. EX:
“1234-Batmobile”
• Paste your default password into the field, and tap “JOIN”
• Once the Batmobile WiFi network is joined, navigate back to the
Batmobile RC Controller application.
• After a moment, a new, randomized password will be generated
for your security.
• Tap the new password button to copy
• Tap on “WiFi Settings” to access your mobile device’s Settings
Menu
• Once in your device’s Settings Menu, navigate to “WiFi
Settings”
• You will be automatically disconnected from the Batmobile
WiFi. Select it again to connect.
• Paste the unique password into the field, and tap “JOIN”
• Once the Batmobile WiFi network is joined, navigate back to the
Batmobile RC Controller application.
• The Batmobile vehicle controls and video feed will appear, and
the WiFi setup process is complete.
|
A: Your baby’s safety has always been our top priority. The seat is designed to hug and support your baby as they sit up and discover the world around them. When your baby is ready to be back in your loving arms, gently pull him or her out of the seat from the back, placing one foot on the base for stability.
|
Tail Swipe
- Long Cooldown
- Stuns the enemy and reduces enemy's agility
|
Each Superstar has his own signature move, offense/defense ranks, signature Superstar entrance, and digital object to use in-game during power play mode (objects are only available in career mode).
After each match, win or lose, you earn experience points which can be applied to upgrade your Superstar’s offense or defense capabilities.
|
You can view an instructional video on our YouTube channel that will help guide you through the assembly of your Bright Beats Smart Touch Play Space! Here's the link to the video:
https://www.youtube.com/watch?v=6AJjKhGPJSs
|
In order to have Secret B Chat™ with friends, you must become best friends on BarbieGirls.com. In order to become best friends, you must connect your Barbie Girl™ to each other’s computers and both receive parental approval to use that feature on the site. In the meantime, you can still have a B Chat™!
|
If Bigfoot stops working, check the following
- Motor Stall – Was there any audible beeps from Bigfoot before he shut down: If audible beeps came from Bigfoot, a motor has stalled.
- 1-Beep = arm motors stall
- 2-Beeps = leg motor stall
- 3-Beeps = head motor stall
To Fix the Motor stall:
- Remove any obstruction from Bigfoot’s path.
- Turn the product off and then back on to restart the product.
- If this stall condition continues to happen when no obstruction is present, there is a malfunction with Bigfoot. Please contact Consumer Relations.
- Low Battery - Did Bigfoot say ‘Low battery’ before he stopped.
- If the battery is low, Bigfoot will say ‘low battery’, and the battery pack needs to be charged.
|
Battery life will vary depending on how you follow the Charging and Battery Care Instructions. It's also affected by the total number of hours the batteries are used. Average battery life is one to three years.
|
Battery requirements can be found inside the battery compartment itself or toward the beginning of each product manual.
1. Enter the product number or toy name, or search by using the keywords below. Then click "Go."
2. Identify your product from the list of results. 3. Click on the product image, and follow the link to download the manual.
Product numbers are listed on baby gear products in small print right near where the Fisher-Price® or Mattel® information is stamped.
All our baby gear has a product number listed in small print near where the Fisher-Price® or Mattel information is stamped. It can usually be found above the barcode on the packaging and instructions, on the fabric tag, or etched into the product itself.
Our product manuals are available in Adobe® Acrobat® format (PDF). If you don’t have the free viewing software, Adobe® Reader®, this link will take you to their website for assistance.
|
The new iPad Air and iPad Mini Retina are not compatible with the Barbie Digital Makeover app.
There is a known issue with iPad Air and iPad Mini Retina devices that is preventing the Barbie Digital Makeover App from functioning properly. We are aware of this issue and we are doing our best to resolve the situation and we will update the app as soon as a fix is available. We do not have a timeframe as to when it will be updated.
The product is compatible with iPad 2, iPad (3rd Generation), iPad (4th Generation) and iPad mini.
iPad is a trademark of Apple Inc., registered in the U.S. and other countries.
|
The Rainforest™ Melodies & Lights Deluxe Gym™ has three different song modes: music, nature sounds, and baby-activated “rattle” mode. In the “rattle” mode, the music plays for approximately 8-10 seconds and stops. Your baby’s movements will activate the sounds again. If baby doesn’t seem to move enough yet to activate the music, we’d recommend using one of the other two modes.
|
Our helpful Assembly and Set-up Video walks you through everything you need to know to get your little cyclist spinning. You can view the video on our website — scroll down the page for that and other helpful video tips!
|
Rotate Bigfoots elbow towards the back of the body for the thumb to latch onto the ball. Do not pull the hand down or forward to give Bigfoot the ball. Once the ball is placed in Bigfoot’s hand correctly, press the ball button on the remote.
|
Yes! Check back often. New mysteries will be automatically downloaded to Dora's laptop.
|
Fisher-Price takes great pride in the Wooden Railway line of products and accessories that we produce and quality is very important to us. We thought it would be helpful to let you know that we include a small amount of plastic on some of our wooden products to further ensure their improved strength.
|
· The action button is the button on the top of the figure’s base that you can press down in order to advance dialogue, use your character’s special ability in the game, and interact with your environment.
|
The name of the user’s room you are in will appear at the top of the screen.
|
Please note that this product needs two sets of batteries, and there are two separate battery boxes. One battery box operates the swing feature and needs 4 “C” batteries. The other battery box operates the vibration feature and requires 1 “D” battery.
If you've already changed the batteries and the swing is still not working, please contact one of our Fisher-Price® baby gear representatives by email or phone at 1-800-432-5437.
|
Follow these steps:
-
Per the instruction sheet, the wing pack with missile figure must be properly locked into place first. A click sound will indicate that it’s properly locked.
-
While cranking the dial clockwise, you will hear a slight clicking noise. You will hear a LOUD click after several turns.
-
For the best launch, crank the dial clockwise until you hear the second LOUD clicking noise. This will be after at least 7 full revolutions, which equates to about 14 turns (2 turns per revolution).
-
After cranking the dial, ensure that wing pack is still locked into place.
-
For maximum distance, angle the toy so the missile figure is at a 30 degree angle. Then press the button to launch.
|
While we don’t have coupon offers available, you can still visit our website and use the “Find at Retail” button to track down all the toys and gear on your list. Once you’ve located a store near you, you might want to check local listings to see if they have any sales or coupon offers.
You also won’t want to miss out on becoming part of our online family. As a member of the family, you’ll receive our newsletter, which includes the latest updates about our brand, events, and products.
Sign up on our websites at:
https://shop.mattel.com/shop
https://www.fisher-price.com/en_US/index.html (US)
http://www.fisher-price.com/en_CA/index.html (Canada)
|
To activate your Barbie® RC Train and Ride™ Horse, Press and hold the button on its forehead until the horse takes a step. Press the button again to make the horse walk. If the horse is not played with for a few minutes, it will go into a sleep mode. Simply press and hold the button on the horse’s forehead until it takes a step to wake it up.
|
Fleet Footed
- Passive
- Increases the hybrid's speed.
|
Mutated Muscles
- Passive
- Increases the hybrid's strength
|
Barbaric Bite
- Passive
- Increases the hybrid's bite attack.
|
Although they are not needed to enjoy all of the virtual reality content within each Experience Pack app, the physical reels provide an extra layer of interactivity called Augmented Reality (AR). It’s important to remember that having the physical reels is the only way to enjoy the Augmented Reality content. When you place a reel on the table and look at it through your View-Master® VR viewer, Augmented Reality icons will appear above the reel. These 3D icons serve as a menu – by selecting an icon with a click of the viewer’s lever, you can launch different experiences. In addition, some Experience Pack apps feature a library of Augmented Reality models that you can explore, but only if you have the physical reels to trigger them.
|
You can win Health Boosts for each of your clans by playing Training Games. Use the Health Boosts in battle to restore some of your hybrid's health, letting you stay in the fight longer.
To use a Health Boost, click the Health Boost icon when it is you turn. The number on the icon will go down, showing you how many Health Boots you have left. When you've used all your Health Boots, the icon will disappear.
Any Health Boots you use in a fight will be used up forever, but any you don't use will carry over for other members of the same clan to use in the next fight. Be sure to use them wisely!
|
Within career mode matches, when either your energy or your opponent’s energy level is low, the game will engage “power play” mode. Within that mode, you can use a special digital object that comes with your Superstar.
This is also where you can use the physical objects that come with the Apptivity WWE Rumblers Starter Set.
|
|
- Insert the test card. If the DVD skips to the test screen, press each letter A-I on the test card and wait for the corresponding letter to light up on the TV screen before pressing the next letter. If each of the letters successfully lights up, press each of the two arrow buttons and wait for the arrow button to light up on the TV screen before pressing the next arrow button.
- If all the buttons light up, remove the test card. The footage should now display a screen with 3 activity cards on it (menu screen). If so, you have successfully programmed the controller.
- Insert an activity card you are now ready to play. See the "Playing with InteracTV" section of your manual.
- If all the buttons do not light up or you return to the menu screen when the card is removed (the controller is only partially functional), it is possible there is a different code which will give the controller full functionality. Try programming a different code using one of the two programming methods. See Programming the remote using Manufacturer’s codes section or Programming the unit using the manual search method section of your manual.
- If you have exhausted all the codes and none of them gives you full functionality, (changing a macro may help) see the "Using Macros" section of your manual.
|
You only need to setup your Read With Me™ controller one time per DVD player. Your Read With Me™ controller can setup to be played with up to 3 different DVD players. There is a 3-position memory switch on the underside of your Read With Me™ controller. Each position of the switch can be programmed to a different DVD player. Refer to your Read With Me™ User’s Manual for instructions on how to use the 3-position memory switch.
|
As released publicly in Mattel’s 2012 Corporate Citizenship Report, Mattel is committed to advancing the use of sustainably-sourced paper and wood fiber in our packaging and products. Mattel continues to work to roll this out across our packaging, products and business. Mattel will continue to work to align wood products with the principles.
|
Click
Press the spacebar as many times as you can before the time runs out.
Single Timing
The pointer moves around in a circle. When it is pointing at the yellow line, click (or press the spacebar). The cloaser to the middle of the line you are, the better your attack will work.
Multi Timing
Same as Single Timing, but there is more than one line to hit. Hit them all for the best results.
Moving Timing
Same as Multiple Timing but the lines move around the circle, not just the pointer. This is the hardest version of the game!
Accuracy
Click all the targets that appear before time runs out.
Shooting Gallery
Hit the targets as they appear. Try to hit the middle for a bull's eye and extra points!
Cool-down
Each Secret Attack has a cooldown time. The cooldown time is how long you have to wait until you can use the attack again. after you use an attack, you will see the icon change to show the cooldown timer. When the cooldown timer disappears, you can use the attack again on your next turn. Secret Attacks have short, medium or long cooldowns.
|
Apptivity is currently only compatible with iPad, iPad 2 and the new iPad. Some Fisher-Price Apptivity items are compatible with iPhone or iPod Touch. Be sure to check toy packaging to see which devices are compatible for your specific toy.
|
The IM-Me Unit may not connect to the internet for several reasons.
- There is a Firewall blocking the internet connection.
- Your router’s security is set to block other parties from accessing your internet connection.
In both of these cases, you will need to contact your security or internet provider for further assistance. When the IM-Me is connected the flower in the task bar will be green.
|
Click here for the assembly video.
|
We know from talking to girls that they not only love to play with Monster but they also like to display and collect them. As a result, we do our best to include doll stands in many of our new character and special edition offerings. There are times, however when a specific set of dolls won’t include a stand - we do this in order to offer dolls at a variety of reasonable price points while still maintaining Monster High's signature style, great details and fun accessories that our fans have come to love and expect.
|
This message might appear for several reasons: • You clicked your browser’s back button instead of selecting to leave the game. • You closed your browser, then quickly reopened it to sign back in. • You turned off your computer while still logged in. • You have two browsers open while one is already logged in.
To resolve the issue, close all browsers, wait 60 seconds, and try again. If that doesn’t work, please click the Contact Us link above.
|
Elsa’s shoes are packed out separately in a poly bag that is taped to the packaging behind the doll.
|
The following car seats are compatible with the J6669/L5344 Stand 'n Ride Stroller:
- Graco SnugRide
- Graco Infant Safe Seat
- Britax Companion Infant Car Seat
- Fisher-Price Safe Voyage Infant Car Seat
|
Washing instructions can typically be found on the care label attached to the pad assembly or toward the end of each product manual.
Product manuals can be found online, by clicking here.
1. Enter the product number or toy name, or search by using the keywords below. Then click "Go."
2. Identify your product from the list of results.
3. Click on the product image, and follow the link to download the manual.
All our baby gear has a product number listed in small print near where the Fisher-Price® or Mattel information is stamped. It can usually be found above the barcode on the packaging and instructions, on the fabric tag, or etched into the product itself.
Our product manuals are available in Adobe® Acrobat® format (PDF). If you don’t have the free viewing software, Adobe® Reader®, this link will take you to their website for assistance.
|
Paint should be fully cured (check paint can for manufacturer's cure time) before using 3M Command™ strips. We recommend waiting a week. Also, alcohol may remove or dull the surface of fresh paint.
|
It's never a good idea to walk into the lair of hungry dinosaurs, even to feed them! Use your special feeding slingshot to keep your distance and shoot food packets into their pens so they can have their lunch.
|
You can, but you will only be able to play the initial portion of each character’s game unless you have Apptivity toy for that character.
To play without the toy, use two fingers to move around the screen, and a third finger to press the action button.
|
The battery pack is located on the doll’s back. Remove the skirt and vest, bend the doll’s arms gently if needed. Unscrew the battery cover at the back with a Philips head screwdriver and replace. Be sure to dispose of batteries properly.
|
|
Compatible smartphone required. View-Master® VR works best with the following smartphones (not included):
• iPhone® 6s • iPhone 6s plus • iPhone 6 plus • iPhone 6 • iPhone 5s, iPhone 5c*, iPhone 5* • iOS 8.3 and above
• Samsung Galaxy S®6 • Samsung Galaxy S®5 • Samsung Galaxy S®4 • Samsung Galaxy Note® 4 • Motorola Moto X™ (2014) • Motorola Droid Turbo
• LG G4™ • LG G3 • HTC One® • Nexus 6™ • Nexus 5
NOTE: View-Master® VR may also work with newer model Android and iOS smartphones not listed above that have screens between 5 and 6 inches. *View-Master® VR apps may not be optimized for iPhone 5 and iPhone 5c.
|
Tips for achieving the best curls are as follows:
1. Use small sections of hair (the width of a girl’s pinky) to get the best results
2. Apply tension as your wrap the curl – the tighter the hair is wrapped, the better the curl
3. Hold for at least 10-15 seconds – the longer you hold, the better the curl
|
Strong Heart
- Passive
- Increases the hybrid's health.
|
Honed Horns
- Passive
- Increases the hybrid's horn attack
|
Cleaving Claws
- Passive
- Increases the hybrid's claw attack.
|
Diseased Claws
- Passive
- Hybrid's claws do extra claw damage to the enemy.
|
If all codes in the instruction manual have been tried unsuccessfully or your brand of DVD player is not listed, it is possible that the code for your DVD player may still be in the controller. You may be able to find the code using the manual search method.
- Make sure the controller has good batteries and slide the 3 position memory switch on the back of the controller to the desired memory position.
- Insert the compilation DVD into the DVD player and turn on the DVD player and TV.
- Insert the programming card into the controller, the green light should blink twice.
- Point the controller at the DVD player and press the left arrow key.
- Continue to press the left arrow key at a 1 second interval. Be sure to watch to see if the power to the DVD player turns off.
- If the power to the DVD player turns off stop and remove the programming card. Turn the DVD player back on. Play the disk and allow the DVD footage to play through until it gets to the screen, which shows the 5 different activity cards.
- Insert the test card into the controller, the green light should blink twice.
- The DVD should skip to the test screen, if it does not remove the test card and re-insert the programming card and continue from step 5.
This process may take a while. If you press the left arrow button more than 300 times and the green light no longer blinks, it is possible that your DVD player's code is not supported by this version of the controller. Verify version and if new version includes more codes for their DVD player. If so, send a new controller. If no new codes have been added to their brand of DVD player, you will need to follow the service policy, return for voucher or refund.
If the test card skips to the footage, which resembles the test card then proceed with testing the controller. See Testing the unit section of your manual or quick set up instructions.
|
You fight Megavores™ by commanding your hybrid to attack when it's your turn. Keep an eye on the stopwatch timer. When it turns green it's your turn to attack! You can click one of the basic attacks (Bite, Claw, Bash, Tail) or one of your Secret Attacks to have your hybrid take action. If you have any Health Boots, you can click on them to increase your hybrid's health during battle.
The basic attacks are Bite, Claw, Bash and Tail. To use each attack, your hybrid must have the right body parts: a preadator's teeth for Bite, clawed legs for Claw, horns for Bash and a spiked or heavy tail for Tail. Use these whenever it's your turn to damage the enemy Megavore™. The most effective attack will depend on your hybrid's stats and your enemy's weaknesses.
|
Your friend must be in her room in order for anyone to visit. And she can only have 5 people, plus her, in her room. Here are some reasons why your friend’s room might not be available: your friend is not in her room; her room already has 5 guests, plus her; her room is locked and no one can come in; her room is set to “knock first” and she isn’t letting more people in.
|
Click the link below and follow these instructions to update your Tech Touch Lightning McQueen.
https://service.mattel.com/us/Docs/Tech_Touch_Lightning_McQueen_Unlock.exe
- Click the "Download App" button to download the update to your PC.
- Click "Save" to save the app.
- Tech_Touch_Lightning_McQueen.zip will download to your Downloads folder. Double click this file.
- Click to “Run” the app if prompted by your Internet browser.
- A window may open, saying: “Windows protected your PC.” If you see this window, click “More Info”, then "Run Anyway,"
- The app should open.
- Make sure Tech Touch Lightening McQueen has batteries installed.
- Connect Tech Touch Lightning McQueen to PC with included USB cable.
- Press Tech Touch Lightning McQueen’s button to power him on. A USB symbol should appear.
- Click the “Update” button in app. Keep Tech Touch Lightning McQueen plugged in.
- When “Update Completed!” appears, exit the app.
- Unplug Tech Touch Lightning McQueen. Enjoy three (3) new race tracks from Cars 3 -- Midnight Run, Willy’s Butte, & Victory Lap!
|
During the setup process your device is connected to your new Hello Barbie™. If the Hello Barbie™ Companion App is closed while Hello Barbie™ is still connected to your device, the "Connection Error" will appear. Please take the following steps:
- Close the Companion App
- Go to your device's WiFi settings
- Reconnect to your WiFi network, Re-open the Barbie Companion App
The error should be resolved and you can continue the setup process. In some cases, you may have to start over.
|
The dragonfly toy is supposed to bend or flop over to the side. It is not supposed to stand upright, as pictured on the packaging.
The dragonfly toy is actually made of a softer plastic and flops over to the side to make it easier for the baby to play with and reach!
A design change was made after the photos were taken for this product’s packaging which is why the picture shows it standing straight up in the air.
|
Click on the button that says “get Super B Chat™!” at the bottom of your screen. Then enter your parent’s email address so we can send them a note to see if it’s okay. We’ll let them know how to activate Super B Chat™, and once they do, you can chat with other girls who have access to Super B Chat™, too!
|
It's easy to save your paintings to your iPad or iPhone. Once your artwork is complete, tap the arrow icon in the upper right corner of the screen. From here, you will be prompted to save your painting to your Photos library. Tap "Yes" and the painting will be stored in the "Photos" application on your device.
|
Any organization that works with children is one that we hold especially close to our heart. If you are an employee of a daycare, nursery school, hospital, school, or non-profit children’s organization, we’re here to help.
If you visit our website at www.matteltoystore.com and click on Discount Programs, then Charity Sales, you’ll find more information to help you out with your request. You can also email CharitySales@mattel.com or call 310-252-6880 for assistance with signing up.
|
Armored Skin
- Passive
- Increases the hybrid's armor.
|
Agile
- Passive
- Increases the hybrid's agility.
|
Tremor Tail
- Passive
- Increases the hybrid's tail attack.
|
Acid Spiit
- Short Cooldown, Active (Multi- Timing Mini-Game)
- Damage that reduces enemy's armor.
|
The following steps will allow you to program your InteracTV controller:
- Make sure the InteracTV controller has good batteries. Slide the 3 position memory switch, on the back of the controller, to the desired memory position. The controller is capable of being setup for up to 3 different DVD players in 3 different locations.The controller must be setup and tested individually for each of the 3 DVD players, but once that is done the controller will retain the manufacturer's code and does not need to be setup again.If the consumer accidentally enters a new valid 4-digit manufacturer’s code, then they must set it up again for that DVD player.It is a good idea to write the 4-digit manufacturer’s code in the labeling area provided on the back of the controller.
- Insert the compilation DVD into the DVD player and turn on the DVD player and TV.
- Insert the programming card into the controller; the green light should blink twice.
- Locate the manufacturer’s codes in the user’s manual.
- Enter the first 4 digit code listed under the manufacturer. Use the right arrow button for the number. The light should blink after each button press and blink a long blink after the 4th digit is entered.
- Remove the programming card.The light should double blink when the card is removed
- Insert the test card into the unit;the green light should double blink.
- The DVD should skip to the test screen, if it does not, repeat from step 3, choosing the next manufacturer’s code on the list. If the test card skips to the footage, which resembles the test card, then proceed with testing the unit.See Testing the unit section of you manual or quick setup instructions.
- If you have tried all of the manufacturer's codes listed and you cannot locate an acceptable code, see programming the unit using manual search in your user's manual.
|
THE VIEW-MASTER® VR VIEWER IS NOT A PROTECTIVE CASE. The View-Master® viewer conforms to Mattel’s standard kid-safe drop tests.
|
The Imaginext® DC Super Friends™ RC Transforming Bat Bot’s remote is shipped without batteries, so please be sure to place two AAA batteries into the remote. Also, there is a clear plastic packaging tab that is attached to the outer leg of the non-battery leg of the robot. The tab should come out of the leg when removed from the box; however, it’s possible that a piece of the plastic remained in the slot on the leg. Please check the slot, which is located behind the front wheel. If you see clear plastic protruding from the slot, carefully remove it with tweezers, and turn the toy off and on again. This should clear the slot and make the toy function as it normally should.
|
Click here for the assembly video.
|
B Chat™ is available to all registered users on BarbieGirls.com. With B Chat™, you can chat using a drop-down menu of words and phrases, which helps keep chatting safe, friendly, and fun. To use B Chat™, just click on the speech bubble on the bottom of your screen and pick cool phrases from the menu that appears! When you click the phrase, it automatically appears in a speech bubble above your character’s head!
|
After a hard day of fighting Megavores™, your dinosaurs need some medical attention. Still, it's a good idea to keep your distance. Shoot the correct medical packs at your patients and have them feeling better again in no time!
|
Creating hybrids are fun, but don't forget to also build up your hybrids with experience points (XP). That's the onely way you're going to be able to beat some of the toughest Megavores™! If a certain Meagvore™ is stomping on your dinos, try to gain XP by fighting some that aren't as brutal until you're ready to move on to tougher foes.
|
Thank
you for your interest in becoming a toy tester! We test new products all
the time, so we need our toy testers to live close to our Play Lab in East
Aurora, NY, or our Imagination Center in El Segundo, CA, so they can be called
in on short notice.
If
your little one is five or younger, and you both live within 50 miles of
Fisher-Price in East Aurora, NY, please visit our website at https://www.fpcastandplaycrew.com.
Once there, just fill out the form to register. If you have any questions about
the Play Lab, you can jump to our FAQ section by clicking here: https://www.fpcastandplaycrew.com.
If you and your family are interested in testing toys or participating in focus groups, and you reside in the United Sates, you can learn more on our website, and register your family for future opportunities: Mattel Imagination Center, El Segundo, CA.
|
There are many different ways to score points during a race.
Win the race:
The best way to score points is to win the race, but you'll also score points for coming in second, third or fourth place, all the way down to eighth. So, even if you do come in last, you still score points for finishing, so get out there and race. The more you race, the more points you earn!
Lead a lap:
You score points each time you're in first place at the end of a lap. That's three chances per race to lead the pack and tack on additional points as a race leader!
Perform stunts:
Jumps, aerial maneuvers, flips and riding the walls all contribute to your overall point total! Race hard and maintain the lead, bu add some acrobatics to stock up on stunt points. Show off and score big!
Collect Coins:
Find the three coins on each track for added points. They're not always in the same place, so keep your eyes open; those coins really add up!
|
While we don’t have historical information, pictures, or resale value information here, you can find a wealth of information online.
For Fisher-Price products, you might also want to check out the book, Fisher-Price: Historical, Rarity, and Value Guide, 1931-Present, Updated 3rd Edition.
For Hot Wheels, you can also log on to www.hotwheelscollectors.com. At the top, click on “Forums” to connect to other Hot Wheels collectors who might be able to help you out.
For Barbie, you can find a ton of articles and stories on our blog at www.barbie.com that will give you an inside look at our dolls. There, you can also connect with other collectors who might be able to help you out. If you click on “Signature” at the top, then “Get Involved,” it will take you to a page where you can find Collector Clubs in your area.
|
You only need to set up your InteracTV controller one time per DVD player. Your InteracTV controller can be set up to be played with up to three different DVD players. There is a 3-position memory switch on the underside of your InteracTV controller. Each position of the switch can be programmed to a different DVD player. Refer to your InteracTV User's Manual for instructions on how to use the 3-position memory switch.
InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.
|
If your DVD player is not responding to your InteracTV controller please try the following:
- Make sure you have set up your InteracTV controller correctly.
- Try moving your InteracTV controller closer to the TV.
- Replace the batteries on your InteracTV controller.
- Make sure your InteracTV controller is pointed directly at your DVD player.
- Always be sure your hand and the activity card are not covering the red window on the front of the InteracTV controller when removing and inserting an activity card.
- Make sure there are no large objects between your InteracTV controller and your DVD player. Large objects can block the signal between your controller and DVD player.
- When changing activity cards, always make sure you remove the activity card from your InteracTV controller slowly, wait a few seconds, and then insert another activity card.
- Double check that the 3-position memory switch on the underside of your InteracTV controller is in the proper position. Refer to your InteracTV User's Manual for instructions on how touse the 3-position memory switch.
InteracTV™ is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.
|